Recent content by obs0lete

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. O

    x3mRouting x3mRouting ~ Selective Routing for Asuswrt-Merlin Firmware

    Thanks for the info! I'll need to try the file later on. There's one thing I noticed however, I cleared all my existing rulesets and expited the files from the /opt/tmp/ folder. When I re-ran each command, I noticed that when exeucting the following command: x3mRouting 1 0 NETFLIX-DNS...
  2. O

    x3mRouting x3mRouting ~ Selective Routing for Asuswrt-Merlin Firmware

    I tired removing the Pi-hole's IP from the LAN section, rebooted router and then re-entered the commands for NetflixDNS, ASNUM and Amazon Global region...and still nothing. When I do listsstats, NetflixDNS shows as 0. I remember this working with the 1.9 releases of x3mrouting. Is therea way I...
  3. O

    x3mRouting x3mRouting ~ Selective Routing for Asuswrt-Merlin Firmware

    I am using an ASUS RT-AC5000, Merlin FW 384.18. Yes, I can: Server: 127.0.0.1 Address: 127.0.0.1#53 Non-authoritative answer: Name: github.com Address: 140.82.113.4 I am using Pi-hole with unbound, so my resolver logs are actually generated by unbound. Below is a quick...
  4. O

    x3mRouting x3mRouting ~ Selective Routing for Asuswrt-Merlin Firmware

    Yes, I did restart it Aug 8 12:30:51 rc_service: service 9985:notify_rc restart_dnsmasq Yes, I show the same results as you. Yes, the processes exist: dnsmasq --log-async dnsmasq --log-async rep dnsmasq --log-async Logging is occuring as far as I can see: You can find my log here...
  5. O

    x3mRouting x3mRouting ~ Selective Routing for Asuswrt-Merlin Firmware

    I did not, so I have enabled it and started the process over again, but no change. dnsmasq.log: ( does not appear to be logging): Aug 8 07:55:39 dnsmasq[31209]: started, version 2.81-32-g93cb543 cachesize 1500 Aug 8 07:55:39 dnsmasq[31209]: compile time options: IPv6 GNU-getopt no-RTC...
  6. O

    x3mRouting x3mRouting ~ Selective Routing for Asuswrt-Merlin Firmware

    Thanks for your reply. Just a few things I'd like to add: This would normally make sense, but in my case I am using a VPN server in the same city as me as a test, and still get the same results. I would exepect that I should still be able to see the same shows. I have no entries...
  7. O

    x3mRouting x3mRouting ~ Selective Routing for Asuswrt-Merlin Firmware

    So, I don't know if I'm just dense but this is no longer working for me. When I was originally troubleshooting this issue I realize now that I had actually used a different server form my VPN provider - this is what actually allowed Netflix to work on my VPN connected devices as the IP address...
  8. O

    x3mRouting x3mRouting ~ Selective Routing for Asuswrt-Merlin Firmware

    Thanks again. It seems to be working now. I didn't have to add the rule for Amazon (yet) but I'll keep an eye out. Enjoy the trip!
  9. O

    x3mRouting x3mRouting ~ Selective Routing for Asuswrt-Merlin Firmware

    Spoke too soon. Seems to no longer be working :/ I'll see if I can investigate this further.
  10. O

    x3mRouting x3mRouting ~ Selective Routing for Asuswrt-Merlin Firmware

    Fantastic, thank you for the response! I tried the dnsmasq method and it seems to be working correctly now. As for your comment about adding the GLOBAL Amazon region, would this be used in conjunction with the dnsmasq method as well or is this to be used with the asnum method?
  11. O

    x3mRouting x3mRouting ~ Selective Routing for Asuswrt-Merlin Firmware

    I think I am having the same issue. One thing Uniken said was "But a few of the IPs from the VPN have issues, when I login to Netflix it only shows Netflix content." This is happening for me as well. I am using the following: x3mRouting 1 0 NETFLIX-AS2906 asnum=AS2906 Which does allow me to...
  12. O

    [SOLVED] FTP with custom certificate?

    Quick question - I have enabled FTP with TLS and it works just fine, however, how can I use my own certificate instead of the one generated by the router? I am currently using my own wildcard certificate to access the router over HTTPS which is OK but I can't seem to figure out how to use the...
  13. O

    minidlna not working on reboot?

    This make sense. I didn't realize that it was actually being loaded from two places. Thank you! Through a series of events, the N66U router I was using is now at my in-laws as their router happened to crap out over the weekend, so I won't be able to test this until next time I am there as they...
  14. O

    minidlna not working on reboot?

    Mark, Thank you for the very detailed reply! I have not had a chance to try your solution, but I will give it a shot and let you know.
  15. O

    minidlna not working on reboot?

    Hi here! I've recently got my hands on an RT-N66U device and have flashed v380.64 on the router. After setting up all my details, I wanted to get minidlna working on the device. These are the steps I took - apologies for the lengthy post, just adding as much detail as I can recall: 1. Under...
Top