Recent content by OcramSagev

I recently bought an used AC86U from Amazon and I was having the same problem, it was driving me nuts (and my other 1/2). It took me a while to figure out what it was causing the disconnects. These were my troubleshooting steps: 1.- I had a Western Digital 4TB that had a mix of NTFS and HFS...

I've been through all this already. What I've found out that works is disabling ReadyCloud and kwilt. His fix worked for me for a while but then I got the reboots, something else is going on. I'm sticking with .79 for now because I'm using the R7800 as an AP and frankly, I am not using the...

I was having a similar problem, Voxel mentioned he released a fix based on a recommendation by Kamoj. It worked for me for about a day and then the reboot happened. Voxel's .79 is the version that has worked rock solid for me. Please share if you find more info on the errors you reported.

Kamoj: The error was fixed by Voxel in the .80 release but he forgot to add the fix after the .80 release. This means the fix is not "live" in the latest releases. Please see Voxel's answer #53 in this link...

I'm having a problem with the mobile app (IOS) not being able to "see" the router after installing the latest add-on. I'm running the R7800 in AP mode. I saw a previous post that recommends to logon/logout of the app but that did not work for me. Latest Voxel fw has a bug that can make the...

Tested. No reboots with the nocloud/nokwit in 24+ hrs :-) iperf3 speeds are comparable with .79 . Thank you so much! It was driving me nuts

Mine dropped from 600Mbps to ~270Mbps (test done using perf3), so I'm basically getting the new speed you are getting

I'm experiencing this as well

Yes, I'll test this with your latest release today. I really appreciate the help (and I do realize that it is not your bug because NG forums are reporting the same issue)

Prices please

I didn;'t know the Kamoj settings were store in the backup settings.. thank you for the notice :)

Voxel: My issue is that any firmwares (yours) above 80+ cause my R7800 to reboot and I have not being able to find the cause. SwampCracker almost the same configuration as mine (AP mode) except for the DFS. Hence my idea is to choose a non-DFS channel, install .82 firmware and see if the...

Thank you for sharing this. I'm going to do some tests with non-DFS channels (My area is mega-congested but it is worth the try) without the USB storage. I'll share the results

Would you mind sharing your settings? AP mode has very few settings. I'm wondering if it has to do with the use of DFS. Are you using an attached USB storage? Auto or Short preamble? My WPS is disabled. I have three devices connected to the ethernet ports: An Ubiquiti EdgeRouter <=>WAN, Xbox...

I've tried all Voxel's firmware starting with .68, everything works well until .79. I did perform the erase configuration data steps. I even used a command to erase the Kamoj settings after the app was uninstalled (can;'t find it right now). STEPS .68->.79: No issues. .80X: Reduces my wifi...