Recent content by onetwobr

Sorry for the delay in answering. I think my scenario is a bit different because I just changed/increased the speed on the same provider, all the equipment remained the same. With high traffic I believe that the CPU load of your AC66U should not exceed 20~30% average, right? It was what I had...

Oh, I forgot to mention that but HW Acceleration is enabled, as well as ipv6 (native). I engaged a couple of torrent files to test speed again and here´s the router usage: Next weekend I´ll do more tests with the Merlin LTS and also with the ONT/HGU that ISP provided me working in router...

Hi guys, Anyone using AC66U (single core) with high speed ISP connections? Recently I´ve upgraded my FTTH from 100/50 to 300/150Mbps and noticed the AC66U easily reaching 60~70% of CPU consumption with not so high speeds like it used to be, especially on P2P. I use the Asus just for...

Bingo! With Asus official firmware version 3.0.0.4.380.7266: - NAT Accelerator Auto + IPv6 Passthrough = Functional, no problem, ipv6 connectivity but terrible performance on local network copies - NAT Accelerator Disabled + IPv6 Passthrough = Functional, great performance at local network...

Well, DMZ only works on IPv4 but based on your affirmation what is your suggestion? Not use ipv6? As far as I know the security, privacy and operation rules of ipv6 is more complex than ipv4. All our compatible devices receive a "public" ipv6 no matter what modem or router is in front of it...

NAT acceleration: Disabling this option make the router stop rebooting when the IPv6 Passthrough is on. https://github.com/RMerl/asuswrt-merlin/issues/1134 BUT, last time I changed this options cause the network throughput low (very similar like the Asus official firmware) and CPU usage went...

Hi John, Do you have tested the "passthrough" option instead native? On my AC66U with Asus oficial firmware this option worked fine on my scenario (NAT behind NAT with a DMZ between provider modem and the Asus). I had to leave the Asus firmware because the performance on the LAN was pretty...

Hi guys, Well, my problem does not only occur with this version of Merlin but can anyone help me? :) https://www.snbforums.com/threads/ac66u-ipv6-dmz.38060/ With the Asus "oficial" firmware ipv6 works like a charm but the Internal LAN performance is so poor (not to mention the lack of...

Hi guys, I have an AC66U and my ISP gave me a FTTH modem where there is no possibility of converting it to bridge, so I have to use it as DMZ to have access from the internet. Using the Asus "official firmware" ipv6 works normally using passthrough mode, but with Merlin does not happen in the...