What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by pascalgeraeds

  1. pascalgeraeds

    portsLinkStaus=0 after ac88u 3.0.0.4.385_20585 update

    with help of https://fatmin.com/2015/01/04/configure-syslog-logging-levels-on-the-asus-rt-ac66u-router/ I changed the loglevel to 4 (warning), which prevents the logging of these stupid notifications. ssh into the router using your router password $ nvram show |grep log_level log_level=5 $ nvram...
  2. pascalgeraeds

    AC88U bricked (stuck at Starting program at 0x00008000)

    Hi Guys, another question, do you know where I could download 3.0.0.4.378.xxx version firmware for AC88U. It seems that there is a major change to the bootloader from 378 to 380. Which repartitions the memory differently. This might be the original cause for bricking the router. kind regards Pascal
  3. pascalgeraeds

    AC88U bricked (stuck at Starting program at 0x00008000)

    Did any of you ever update a CFE bootloader using FLASH or any other commands available in the CFE : nvram NVRAM utility. reboot Reboot. flash Update a flash memory device batch Load a batch file into memory and execute it go...
  4. pascalgeraeds

    AC88U bricked (stuck at Starting program at 0x00008000)

    Hi AndeiV, with power cycling the router and run the recovery tool, do you mean: - Power Off - reset button + Power On : until powerLED starts flashing slowly. - setting up my laptop on fixed IP (192.168.1.10) Netmask (255.255.255.0) gateway (192.168.1.1) - try ping 192.168.1.1 to validate I...
  5. pascalgeraeds

    AC88U bricked (stuck at Starting program at 0x00008000)

    Hi, does any of you know how to backup a CFE and load it to flash gr. Pascal
  6. pascalgeraeds

    AC88U bricked (stuck at Starting program at 0x00008000)

    Hi OzarkEdge, Thanks for your response What makes you think so ? The memory seems to be recognised (at least the full 512MB seems to be there). Tot mem: 524288 KBytes kind regards Pascal
  7. pascalgeraeds

    AC88U bricked (stuck at Starting program at 0x00008000)

    Hi AndreiV, yes I did. I can put the AC88U in recovery mode (reset button + poweron = slow flashing powerLED).... I could also see on the serialcable monitor that it is waiting for the TFTP sw transfer. I could load various AC88Uxxxxxx.trx files to it. And in the serialcable monitor I could...
  8. pascalgeraeds

    AC88U bricked (stuck at Starting program at 0x00008000)

    My Asus AC88U is bricked, I was able to connect a serial cable to it and could log the boot sequence it is stuck at "Starting program at 0x00008000" It does allow upgrading firmware (original Asus, Merlin etc.) but it does not seem to pass this step. I can interupt the bootloader: CFE...
See more
Back
Top
✖