Recent content by Petrica

While trying to block IOT devices on home network found that some of the troubles connecting for the wifi clients might be due to blocking internet access feature. Blocking internet access for too many devices in Time Scheduling or in Network Map can actually lead to blocking internet access...

If you're interested in alternative approaches you can run a home automation software (i.e. OpenHAB or Home Assistant; I use Home Assistant) on a low power device (such as Raspberry Pi or NUC) to monitor and control both UPS (with NUT sensor) and router; it also comes with fancy graphs and all...

Hi, I'm using a dual NAT environment (ONT modem and AC88u) and on 382 and also 384 some devices connected to AC88u regardless of LAN ports (1-4 or 5-8) are pushed on the ONT LAN, not being accessible from AC88u LAN as if AC88u would be in bridge mode. I use 192.168.1.x IP range for ONT LAN...

Hi, The char limit is present also on AC88u. Copying cfg file from AC87u (380.68_4) to AC88u (382.1) allowed from the beginning for using a significant larger DHCP static list although AC88u has double NVRAM size compared to AC87u. AC88u was first set on 382.1. 83 static addresses (with...

My bad as I posted the first screenshot without explanation. On a side note (aesthetics only as the core code is different based on processor type - no functionality issues; I have only N66 and AC87): the order of interfaces for N66 is LAN 1 to 4, while for AC87 is LAN 4 to 1. Thanks for the...

Hi, Any thoughts on the below (AC87u with 380.67 upgraded yesterday from 380.66)? Doesn't change on reboot. Thanks

Hi, I haven't found similar issue description: on a AC87u running Merlin fw (380.65_4) OpenVPN client list gets loaded twice in NVRAM (as both vpn_client1_clientlist and vpn_client_clientlist with the same content). As I use quite a lot of rules for policy routing each list eats up 3.5 KB...