Recent content by Phk

Hi guys, your suggestion worked just right, I'm ashamed. By looking physically to the router, I found 2 old ethernet cables on port 1 and 2 connected to the NAS also on port 1 and 2, and had bonding still active on the NAS side. Unplugging one of them, made my PC port 8 turn to 1GB and the...

Hello guys, Sorry I'm not used to post here therefore I'm not aware of the details you need to help me out on this one. I have an AX-88u with firmware 3004.388.8_4 and am experiencing very slow speeds and high latency via ethernet to a desktop computer. The router has amtm and diversion...

Damn you were fast :) Of course I'm cool with that, thanks Viktor! If you need anything from me, I'll DM you a telegram id. Thanks!

Hi @Viktor Jaep , this seems a very very nice project, congrats! I'm using Surfshark VPN, and I was looking for a way to daily switch to fastest server (as well as whitelist it on skynet). Any way of doing this with your script (vpnon or vpnmon) even I have to do some changes? Would like to...

Hello guys, Title says all. So, after flashing a new build I noticed I have new CA\Server Keys in OpenVPN, so, the router doesn't keep the previous keys. My question here is, are these new keys built-in the new ROM image, or are they generated in first boot, and unique per each device? Thanks

Hello again, You are right, I've done a clean install first, just like referred in the link you shared. Thank you, saved. The issue "changed" but there is still a bug. So, let me detail the steps: I've configured the basic wifi 2.4 and 5g SSID with smart connect, and then two guest networks...

Hello everyone, Finally, I'm able to reproduce a bug that pretty much happens in every 2021 release for AX88u. I wasn't able to pinpoint it, so I was using an old version (from more or less one year ago). I have an SSID for 2.4Ghz and 5.0Ghz with the same name, lets say "MYWIFI", without WIFI6...

Hi, just use a high port in these settings. Then, when you download the openvpn configuration, the new port setting is built-in. The wan interface also gets the inbound-NAT automatically done, meaning, you don't need to configure port forwarding.

Hello, I've never been able to totally fix the issue. For now I received a new ax88u so my ac88u is stored. Using exactly the same setup scenario, I'm getting 4MB/s in VPN instead of 0.7MB/s, and the wired clients do not lose connection when I'm testing (similar to your issue). It's a really...

Nop, no errors this time with this configuration. I've changed to: no control channel encryption, AES-128-GCM forced encryption. Results are: Little improvement from 650kb/s to 900kb/s (but still bad since its 20% versus a 4.5mb/s in direct transfer using the same ISP\machine scenario) No...

Alright, still have issues, but here's the debugging per suggestion: @elorimer - I ruled out the compression to "none", still happens a cap <20% @eibgrad - I tried 2 ISPs, and even tried using my 4G network. Same values (even in mobile, it's stuck at 650kb/s approximately). @MaziahBebop - Np...

Hi Merlin, thanks for the tip. Not considering it, i have set LZO to "no" in the last test above. Do you think it's a normal overhead? To drop from 4.5mb/s to 0.7mb/s? Something is not making sense to me. The router is not overheating, I have no issues in the logs.. :| Will try some minor...

Good question, I noticed that also, TBH the only thing I found about IPv6 was the IPv6 Firewall, which I now disabled.

Ok guys, so, everything is stable now, unfortunately the bandwidth is still about 20%. I've checked the temperature and it's always around 87ºC, in the top command, the openvpn server takes around 25% of one core. The speed is always capped around 700kb/s when without VPN using a direct IP...

Hello everyone, sorry it took a while to be able to reproduce de exact same scenario, but now I have everything ready and I can test it whenever I want, so, now I can try to find the problem. So, I've switched to TCP and compression to LZO-Adap. Result: 1. 1,5mb/s cap, never really got into...