Recent content by quattroman

Yes did, no change.

New ont did not change this behavior unfortunately.

So do i read it correct when you are already running merlin 3006.102.2_2 you can dirty upgrade without the nvram bypass and therefore no need to reset to default? Kind regards, Q

Perhaps @RMerlin is aware of possibilities?

Found this to…. DHCP WAN Reconnect Problems Across ASUS Routers / Firmware Versions

Hi tim, Ont has not changed only the router has been upgraded from rt-ax88u to rt-be88u. Never had issues with the ax88u with this ONT. It looks like either the router ornthe combination is the culprit. Lets hope it will change when i receive a new ONT in januari 2025. Q

For now i am okay (i guess) hope there will be a future update to solve this. And indeed it is super annoying! Cheers

I have the same issue with RT-BE88U router running latest Merlin firmware RT-BE88U_3006_102.2_2. After rebooting the router it will not receive an ip address from my ISP. workaround : disconnect and connect the wan ethernet cable and it receives an ISP adres (red light turns white ). I am...

Fixed it woth 30 30 30 reset and mini webserver buildin to upload newest merlin firmware and working now. Regards w

hi, bought a second hand rt-ac68u with HGG firmware on it,....... could nog flash to merlin recent firmware so decided to load an old merlin firmware.....but now the rout is in a loop. will not boot. all lights flash after a minute or so but no radio leds are on. als cannot get it into...

Fixed by deleting first guestnetwork and enable 2nd guest network

Upgraded my AX88U by hard reset WPS and afterwards soft reset....all looking good some temp increase of 5 degrees. but this is occurring every 7 seconds : Jan 31 14:01:55 kernel: protocol 0800 is buggy, dev eth7 no idea what happening. regards Q

Installed it to. Poor 5ghz for me, went back to merlin again his last stable version. Anyone having same issues? regards. Q

Only little improvement on the 2.4ghz coverage? hmmm that sounds not that okay to me... regards,Q

very curious if that has solved the flaw 2.4ghz issues of the current firmware running on the rt-ax88u....