Recent content by randomised

hi Colin, I did a search and couldn't find anything related to my mystery ssid, I'd like to find out where it's coming from if you can help that would be great

hi hi I just had a look at the DSL modem and it's got some of the rules for vlans than the router gets that I don't know where it comes from, this is directly after a factory reset wgn_brif_rulelist=<br1>192.168.101.1/24><br2>192.168.102.1/24...

I think I found the thread but it was about the jffs being read only this is what mine looks like cat /proc/mounts /dev/root / squashfs ro,relatime 0 0 devtmpfs /dev devtmpfs rw,relatime,size=255988k,nr_inodes=63997,mode=755 0 0 proc /proc proc rw,relatime 0 0 tmpfs /var tmpfs rw,relatime 0 0...

hi it's got this one 3.0.0.4.386_50117 the dsl-ac68u I'll search for the ubifs thread, thanks for the tip

if it's in my router then it's probably in the DSL modem too, that's an ac68u, I'll have a look at the nvram in that

here's the syslog

hi I've just done the nvram erase and rebooted it's come up as new, however looking at the log it's after the NVRAM mirror scan where it says it found a backup that I've noticed it's already got the VLAN rules coming through that's why I'm thinking it's done a restore from that mirror and...

my setup is very basic, it's just a home router with guest wifi enabled, no mesh, it's bridge mode to the DSL modem I've only ever had Merlin scripts on it my feeling is the it's restoring from a nvram backup, where are they kept and how can I delete those?

yes, I have done that also with the restore tool in fact I only just did a factory reset few days ago nvram erase I've done a few times and it just comes back the same again

hi, output as follows wl0_vifnames=wl0.1 wl0.2 wl0.3 wl0.4 wl0_vifs=wl0.1 wl0.2 wl0.4 wl1_vifnames=wl1.1 wl1.2 wl1.3 wl1_vifs=wl1.1 wl1.2 wl_vifnames=wl0.1 wl0.2 wl0.3 wl0.4 size: 75987 bytes (55085 left)

hi yes I've already done that it's in my routers nvram, it definitely my router

HI yeah I've done the nuke a few times,

@RMerlin hi guys, after installing the latest firmware everything I removed from nvram came back again it's like the source info is changed where NVRAM is stored can you help me with that I'm kind of getting bit desperate now

maybe related if I try to install Asus firmware over Merlin it fails, the only way to get back to ASUS original is to apply the very first firmware version listed on the Asus website

here is some of the VPN stuff in nvram wgn_brif_rulelist=<br1>192.168.101.1/24><br2>192.168.102.1/24> wgn_enabled=0 wgn_vlan_flag=0 wgs_addr=10.6.0.1/32 wgs_alive=25 wgs_dns=1 wgs_enable=0 wgs_lanaccess=1 wgs_nat6=1 wgs_port=51820 wgs_priv= wgs_psk=0 wgs_pub= wgs_unit=1...