Recent content by recepbaltas

It was on Onedrive but it no longer is since it has reached final I believe. Try this: https://sourceforge.net/projects/asuswrt-merlin/files/RT-BE88U/Release/RT-BE88U_3006_102.6_0.zip/download I'll let you know when I hook up the device. Update: Problem is not solved. SFP back to 1 Gbps again :|

Merlin Alpha Firmware fixed the issue.

I have now confirmed that the problem is indeed on the ASUS side as I have connected my Huawei MA5671A SFP and still got the 1 Gbps. I'll do a factory reset. If it does not work, I'll wait for a new Merlin FW.

Still the same. This is my SFP+: https://tr.aliexpress.com/item/1005007300051703.html It worked at 2.5 Gbps before:

There is not a seperate GPON. SFP+ itself is a GPON ONT (Alcatel Lucent G-010S-P). But I'll try your recommandation anyway by removing them and then waiting for some time. I'll report back.

Just updated the firmware AFAIK 3006.102.5 Merlin Ethernet cable is working at 10 Gbps, no problem there. Don't know the upstream speed but link speed is 1 Gbps Router has not been moved. BTW, removed the SFP+ and plugged in back, no luck. Yes, I've rebooted the router I didn't unplug the router...

Hi, I have an Alcatel Lucent SFP+ GPON ONT stick plugged into BE88U but it's stuck at 1 Gbps. Should have been 2.5 Gbps. I tried some commands with no luck. It wored at 2.5 Gbps before. What could be the issue? ethtool -s eth9 speed 2500 duplex full autoneg off ethtool -s eth9 autoneg on...

IIRC opkg install findutils also failed :/

Unfortunately, ./install_easy.sh does not work on the latest Merlin. admin@RT-BE88U-E280:/tmp/mnt/TECHOLAY/entware/zapret# ./install_easy.sh * checking system system is not either systemd, openrc or openwrt based easy installer can set up config settings but can't configure auto start you have...