Recent content by RHF

Acute lysdexia ;)

I'm experiencing a similar behavior with the speedtests. I have a symmetrical 300 / 300 Mbps connection. When I run speedtest.net from my laptop connected to the router via Ethernet cable I get the full bandwidth. When I run the test from the Ookla Speedtest or spdMerlin, I get about half the...

Thank you! That answers question 2. I'm assuming that any write operation to jffs will shorten the flash memory life just as nvram commit does (see last sentence in this post). Is that correct?

Hello everyone, I have an AC68U in "Wireless Router" mode (sw_mode=1) with the WAN interface disabled. Why not just use "Access Point" mode? --> I want GUI access to OpenVPN client configuration (among others... here's the full story for those interested). Furthermore, I've added the WAN...

Could you share how you do this? I haven't been able to figure out how the vpn_client* variables become the dynamically generated configuration in /etc/openvpn/client*...

System state admin@RT-AC68U-9478:/tmp/home/root# brctl show bridge name bridge id STP enabled interfaces br0 8000.4cedfba59478 no vlan1 eth1...

Config.ovpn # Automatically generated configuration daemon ovpn-client1 client dev tun11 txqueuelen 1000 proto udp remote <SERVER IP> 1912 connect-retry-max 15 nobind persist-key persist-tun compress ncp-disable cipher AES-256-GCM auth...

/jffs/scripts/services-start #!/bin/sh # Configure VLANs, Bridges and IPs ip link add name vlan10 link eth0 type vlan id 10 ip link add name vlan20 link eth0 type vlan id 20 ip link set dev vlan10 up ip link set dev vlan20 up brctl addbr br10 brctl addbr br20 ip...

Hi everyone, I finally made some time to work on this over the weekend and have a mostly functioning system. It's currently not pretty, but it works. There are still a few wrinkles to iron out and I need to change the "quick and dirty" scripts into something more robust. Below is a summary of...

One word: Monopoly... This is the only ISP that supports more than 20 Mbps in the area.

Thank you for the comprehensive overview. I wasn't familiar with the YazFi script. Now installing it. Unfortunately my ISP doesn't support DMZ. It's Unitymedia in Germany. They don't support bridging either... I'll try to work on a solution using YazFi over the weekend.

Fair point. I guess the requirements are: 1. WAN interface bridged with the Wireless interfaces (that includes DHCP relay) so the devices that have direct access to the Internet (not through a VPN) don't need to do double NAT (once for the AC68 and again for the cable router) 2. Specific...

Thank you! I'll try it out tonight.

Showing three laptops to keep the diagram simple. There are really about 20 devices distributed across the three LANs. Thanks for the buyer's remorse ;-)

Too late now... I bought it a couple of months ago. It will definitely be faster than my E1200. Back then I had looked into the 86U and there was some limitation that made me decide against it (can't remember anymore). Possibly VLAN support???