What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by ricardjs

  1. R

    Hard Drive Or Nas Suggestion

    I'd thought i'd contribute, as i don't write a lot here... I can vouch for QNAP being great. At home I have an old TS-212... As said above, it doesn't need a lot of power to run it, as it as a single core 1.2 ghz cpu with 256 of ram. I use it for file server, personal cloud (works...
  2. R

    Can't connect to 2.4G, please help.

    Thank you for your attention and advice. For all testing i allways used 20MHz at a fixed channel. Channel 1 has no overlapping, but it is interesting to note that channel 6 presents less noise (even though it has 2 networks there overlapping). I also supected a bit what you say, from the tests...
  3. R

    Can't connect to 2.4G, please help.

    Another update: It is definitly the Asus software. Following something i read here, I decided to do a recovery of the RT-16N, and witout any configuration, just try to use it. Guess what, it's working flawlessly! The reason i say it is on the software it is because the issue was replicated...
  4. R

    Can't connect to 2.4G, please help.

    Update: The modem we have working is a modem router Technicolor. We untill now have had it in bridge mode and with wireless off. For testing, i enabled the wireless. All equipments connect to it without issues...
  5. R

    Can't connect to 2.4G, please help.

    I understand what you say and even would agree if it was not for the fact that i put there the DLINK AP (only G mode) and it works flawlessly! I installed the latestMerlin's on the RT-AC66U and the results were almost the same, it was a little better in the way that it actually worked good for...
  6. R

    Can't connect to 2.4G, please help.

    I tried version 7 and 8, same results... i will try to install merlin's on the AC66...
  7. R

    Can't connect to 2.4G, please help.

    I see he has and RT-16N firmware, i will try on that one first and see how it goes... Thanks for the help!
  8. R

    Can't connect to 2.4G, please help.

    Yes, i also don't think so, because, as you say, my address pool is covering all addresses freom 192.168.1.2 to 192.168.1.254 I think it may be firmware related, as all RT-N16 and RT-AC66U behave the same... Also, using just wireless G or N could make a difference? I mean, the Dlink just uses...
  9. R

    Can't connect to 2.4G, please help.

    Thanks for you answer. Reducing the bandwidth to 20 MHz was the first thing i tried, the result was the same... Can you please elaborate on your other option (dnsmask) and how to try a fix? Thanks again for your help!
  10. R

    Can't connect to 2.4G, please help.

    To add some more info, that i believe that helps prove that it is not interference: Everytime i reboot the router i can (as mentioned above) connect to any of the ip cameras and see the transmission, that with seconds, sometimes minutes, start to be slower untill the cameras disconnect. Thanks...
  11. R

    Can't connect to 2.4G, please help.

    Hi all. The problem is as described, and is very strange, as you'll be able to see: Tested with 3 routers: Asus RT-AC66U (2) and RT-16N All had the latest asus firmware; All were reset to factory defaults after the update and configured manually. Problem, can't connect to 2.4G: Or I'll...
  12. R

    Network configuration: Where is the problem?

    Yes, i did try with only the player and, i'm the only one using the network during those times of testing... How i see it, the cables are good, as independently everything works... the devices are good, as again everything works... just when both the the QNAP is set to gigabit, the network...
  13. R

    Network configuration: Where is the problem?

    Ok... I did some more testing: I put a 10/100 switch between the router and the network media player. Still the same conclusions... Anyone?... Thanks.
  14. R

    Network configuration: Where is the problem?

    Hi to all. I read these boards for some time now, mainly for reviews, until now. I've come into a problem that i need help or, some explanation as to why. Configuration: Internet -> ROUTER (Asus RT-N16 with tomatousb) -> NAS (Qnap 212)...
See more
Back
Top
✖