What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by RogerSC

  1. R

    ASUS ZenWiFi BT10 Firmware version 3.0.0.6.102_39009

    Got a couple of days on this one. Looking good, no new problems that I've found. Working well. Not seeing the "smarthaul" messages yet, although they may be along at some point *smile*. Anyways, been stable and performing well.
  2. R

    What are your thoughts on the new AI router GT-BE19000AI?

    Don't forget the RT-BE96U, 4-streams on each of its 3 bands. Nice wifi-7 performance.
  3. R

    Asus ZenWiFi BT10 on sale (2-pack)

    Sorry, didn't know that there was a special forum for this. Guess I should have looked, then? The moderator of the Asus forums is free to move this thread, looks like it's played out in any case *smile*. Seemed like a really good price, and I wanted to share it for those that it might matter to.
  4. R

    Asus ZenWiFi BT10 on sale (2-pack)

    Working well for me, too. Best wireless we've had.
  5. R

    Asus ZenWiFi BT10 on sale (2-pack)

    Yes, I paid $600 for a 2-pack about 3 months back.
  6. R

    Asus ZenWiFi BT10 on sale (2-pack)

    The ZenWiFi BT10 (2-pack) is currently on sale on Amazon for $500. This is the lowest price that I've seen so far...limited time, so if you've been thinking about it, might be time *smile*. I don't work for Asus or Amazon.
  7. R

    BQ16 pro satellite not initializing

    The light guide referred to above says that your router's magenta light indicates it's in "rescue mode". Did you try the steps to revive a router that's in rescue mode? Usually this involves sending your router the firmware image that you're using via tftp, or using the Asus rescue mode recovery...
  8. R

    Release ASUS ZenWiFi BT10 Firmware version 3.0.0.6.102_38991 (2025/09/16)

    Just one more note *smile*. I turned off MLO on my main network to see what would happen. What I've been seeing is that I've retained the great wifi speeds all over my house, in excess of 900Mbps on wifi-7 devices, and things look better relative to the number of system log messages. Which means...
  9. R

    Release ASUS ZenWiFi BT10 Firmware version 3.0.0.6.102_38991 (2025/09/16)

    Well, the "THRSH 2048" system log messages have reappeared with this firmware, again associated with our Apple mobile devices. Really would be nice to know what that's about, but there's no information about this from Asus. Lots of questions about these messsages on the internet, though. Still...
  10. R

    Another 3.0.0.6 quirk, using bridge devices

    Got a BT10 mesh here with an XT8 configured as a media bridge (on 3.0.0.4) for exactly the same purpose, ethernet for a 4-tuner HDhomerun Flex OTA DVR. Works fine. I'm using the 5GHz. IoT network for it. Also worked fine with both the GT-AX6000 and the RT-BE96U, all on 3.0.0.6. I realize that...
  11. R

    Release ASUS ZenWiFi BT10 Firmware version 3.0.0.6.102_38991 (2025/09/16)

    Don't know either. I have a Samsung S25+ that's fine with MLO for my main network here. Lots of variables and differences between two different home networks, though. No problems with the new firmware yet...of course, one day isn't really a lot of time *smile*.
  12. R

    Release ASUS ZenWiFi BT10 Firmware version 3.0.0.6.102_38991 (2025/09/16)

    Flashed this today. Good so far. Looks cleaner in terms of Wireless -> Professional settings, and I'm not seeing those disturbing "THRSH 2048" log messages. Haven't seen any "smarthaul" messages yet, either, now that I think about it. Still seeing the "DEAUTH error -30" messages, though. On the...
  13. R

    Asus BT10 - still not stable at all even after latest firmware - been tinkering for months - high frustration

    What happened when you tried to use the "bind" option? If you got the warning about how you might not be able to do it, just ignore it assuming that you know that the client device is close enough to the node that you want to bind it to. That warning is just a warning, it can be ignored, and the...
  14. R

    Asus BT10 - still not stable at all even after latest firmware - been tinkering for months - high frustration

    Have you tried binding devices to particular AiMesh nodes using the AiMesh tab in the web admin GUI? I've done that from time to time, if a device seems to end up on the "wrong" node. Easy to do when you have the client list for the "wrong" node up (by clicking on the AiMesh node to which the...
  15. R

    Asus BT10 - still not stable at all even after latest firmware - been tinkering for months - high frustration

    The ZenWiFi BT10's are working well here in AiMesh mode. With MLO enabled wireless backhaul, as is the default backhaul mode. Works great, no instability problems. Main network is also MLO enabled, and have an IoT network for client devices that are not compatible with wifi-7. All working great...
See more
Back
Top
✖