Recent content by Rumline

No dice. Web server is set to both protocols: https://192.168.1.1:8443 just gives "The connection has timed out" or "The server at 192.168.1.1 is taking too long to respond." I can connect via http://192.168.1.1 (that's how I got the screenshot). While I can admin the device via...

I have an even worse problem: the admin web page refuses to draw at all on https://192.168.1.1:8443. RT-AC5300. Just upgraded to asuswrt-merlin 384.4 (Release). Performed a factory reset with JFFS format. Manually reconfigured everything. Created a self-signed certificate and imported it...

Running an RT-AC5300 with Merlin 380.69. It appears the "Channel Bandwidth" only has "Auto" as an option. Is that because I'm using Smart Connect? I don't see anyplace else to change this setting in Professional or Smart Connect Rules.

Update. Switching the ASUS back to Native IPv6 mode made the LAN to WAN traffic start working. If the WAN IP address is 2603:xxxx:yyyy:8600::/56 the LAN IP address becomes 2603:xxxx:yyyy:86f0::1/60. That's what comes up when in native mode. But when I switch back to Static mode and use the...

I now have the Netgear ISP modem in bridged mode. I also updated to Merlin 380.69. I have the static IPv6 WAN setup and can move traffic from the ASUS over eth0. admin@RT-AC5300-54A0:/tmp/home/root# nslookup www.google.com 2001:4860:4860::8888 Server: 2001:4860:4860::8888 Address 1...

Netgear CG3000DCR HW Version: 1.04 Firmware Version: V3.01.15 Operating Mode: Residential Gateway Yes, the same behavior occurred with the stock ASUS firmware. It's the reason I moved over to Merlin. Thanks.

Running Merlin 380.68_4 on an RT-Ac5300. Enabling IPv6 works fine for a while. Then after several hours the IPv6 interface on the RT-AC5300 stops working. No response to IPv6 ping and of course no DNS. Have to reboot the router to re-gain IPv6 connectivity. Also, I've set the manual IPv6...