What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by SCircuit

  1. S

    Site Survey does not return any results

    Here's my results: _sw_mode = '1'; wlc_state = ''; wlc_sbstate = ''; wlc_scan_state = '3'; _wlc_ssid = ''; aplist = [["2G","xxxxxxxxxxxx","11","Unknown","WEP","7","xx:xx:xx:xx:xx:xx","bg","0"]]; The SSID is 12 letters, all lower case, with no spaces
  2. S

    Site Survey does not return any results

    After fresh reboot the above command returns a zero. Any time after a Site Survey attempt the above command returns a three.
  3. S

    Site Survey does not return any results

    Here's my 2.4 GHz settings (my SSID is a six letter word, first letter is uppercase):
  4. S

    Site Survey does not return any results

    I rebooted the PC then launched Chrome then rebooted the router and went to the site Survey tab and it looks just like the first image I showed above... I have also made sure no Chrome extension were loaded.
  5. S

    Site Survey does not return any results

    Here's what I see the first time I go to the Site Survey tab after logging in to my router via Chrome: And here's what I see if I leave and return to the Site Survey tab with Chrome error console displayed: I get the same results using Opera and IE9.
  6. S

    Missing screens... in firmware screens

    I have exactly the same problems with the displays as you when I access the router via Internet Explorer 9 which, from your screen shots, it looks like you are using IE9. The displays show correctly with both the other browsers I use - Chrome, and Opera.
  7. S

    Site Survey does not return any results

    Thanks to both of you for the informative links! Yes, my radios are enabled and I tried both scan modes. I may have made some progress tonight. I had previously set my RT-N66U's 2.4 Ghz control channel to channel 1 based on site survey data I had obtained via my Nexus 10 tablet running Kevin...
  8. S

    Site Survey does not return any results

    Running a wireless site survey on my RT-N66U does not present any results. All I get is this message "Searching for available networks, please wait..." and an endlessly spinning activity indicator, while the rescan button stays greyed out. This line shows in my system log "rc_service: httpd...
See more
Back
Top
✖