Recent content by sharmay

Upgraded to 386.14_2 (latest) and TLS working as expected.

FYI, this is a temporary solution. You have execute these commands after every reboot. I am still trying to find a permanent solution, if not I will add a script to run these steps after boot.

I have reviewed link postS but not helpful in my case. My uploaded cert is a valid letsencrypt cert. Same one work on AX88U. This seems to work (not sure if it is a permanent fix): ssh to ac3100 cp /jffs/.cert/key.pem /tmp/etc/key.pem cp /jffs/.cert/cert.pem /tmp/etc/cert.pem service...

RT-AC3100 in access point mode (hardwired) I have custom certs installed which are still active. After upgrading to 386.14386.14 web is using auto generated certs instead of one I have uploaded. When I revert back to 386.13 correct certs are used. I have not seen any thing in log for this. Any...

I will get this when I run into this issue. I will capture logs next time. On interface ATT Gateway it was showing disconnected. Yes, automatic. I will check on dhcp lease and monitor it. Thank you. I use same ssid for 2.4GHz & 5GHz. So total of 3 ssid 1 for wireless Guest 1, Guest 2.

Any idea about this log message ? br0: received packet on eth7 with own address as source address On router WAN,1,2,3 are only port in use, what is eth7 ?

ifconfig eth0 shows no IP and WAN light is red.

That is all I see in syslog besides DROP packet messages.

Hi, Periodically router will loose WAN IP and when I connect to ATT Gateway I can verify internet still working, WAN address is still the same. Hardware: AT&T Gateway <--> RT-AX88U <--> AC3100 (mesh) RT-AX88U is in DMZ (IPPassThru) Addons: Diversion, YazFI to isolate Firmware: 386.4 ( same...

Will give it a try, thank you

Thank you for clarification.

I am using this fork only so don't know but I have seen this https://itigic.com/we-tested-wireguard-vpn-on-asus/ and others talking about wireguard, may be I am mistaken.

Updated RT-AX88U to 386.4_0 everything works but on VPN page I am not seeing wireguard tab. What I am missing ?