What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by shuaigebo

  1. S

    ASUS RT-AX86S still shows old value after RAM upgrade

    I compiled success /RMerl/asuswrt-merlin.ng.Thank you again for your help.
  2. S

    ASUS RT-AX86S still shows old value after RAM upgrade

    I compiled it https://github.com/SWRT-dev/asuswrt-bcm All firmware tests inside are normal. thinks。and I seem to understand now. I should specify the version when downloading the source code, such as 3004.388.9_2, and then try again.
  3. S

    ASUS RT-AX86S still shows old value after RAM upgrade

    I encountered a problem while compiling firmware, as shown in the picture. What can I do?
  4. S

    ASUS RT-AX86S still shows old value after RAM upgrade

    thanks.
  5. S

    ASUS RT-AX86S still shows old value after RAM upgrade

    good works，I refreshed this firmware and it is working properly. I don't know how to compile firmware. Can I use winhex to modify the already compiled firmware to achieve the same effect? For example, RT-AC86U can backup mtdblock4 and mtdblock5, search 27140000000000002301 and change it to...
  6. S

    ASUS RT-AX86S still shows old value after RAM upgrade

    I have an RT-AX86U, can I backup partitions and write them directly.use dd if=/dev/mtdblockX of=/tmp/mtdblockXbin and dd if=/tmp/mtdblockX.bin of=/dev/mtdblockX.
  7. S

    ASUS RT-AX86S still shows old value after RAM upgrade

    RT-AX86S uses the firmware of RT-AX86U. I refer to your method of upgrading 2G to find the firmware code 27140000000000004A01 and replace it with 27150000000000004A01, but it does not work. Cfe4908.bin cfe4908ram.bin cfe4908rom.bin precfe4908rom.bin. I used Winhex to search for...
  8. S

    ASUS RT-AX86S still shows old value after RAM upgrade

    5SA47 D9STQ I think the bootloader must be config.
  9. S

    ASUS RT-AX86S still shows old value after RAM upgrade

    I have an RT-AX86S, and I upgraded the memory from 512MB to 1024MB. After the upgrade, it started up normally but the system still displayed 512MB. How can I make 1024MB work.
See more
Back
Top
✖