Recent content by slowmotion

Version 3.0.0.4.388_25210 95.05 MB 2025/05/19 Optimized the app’s remote access capabilities for a smoother and more reliable connection. Improved compatibility with certain IoT devices. SHA-256 ：C0B3ECB80522A3645ACD6380036C7915493E98CF9EB8A59F087E502583FD379D...

Just upgraded 5 mins ago. A mesh pair. So far so good.

Channel bandwidth: 40 Mhz -> 20 MHz (40MHz practically unusable unless there are very few 2.4GHz APs nearby) and do you have any Wifi scanner (like Wireless Diagnostic>Scan, or Android WifiAnalyzer, etc) to figure out the least busy channels? The Auto setting might not be optimized enough to...

I don't have bad 2.4GHz coverage, but in the first couple of days, the 3 cores (they only enabled 3 cores even on 4-core CPU) did have one -nearly always- 100%, which went away afterwards. Meanwhile does your 2.4GHz channel is Auto, or manually locked at a particular channel?

After more than 24 hours of use, I would say the new firmware (388.24762) really has some issues, at least on web admin UI. The AiMesh connection would disappear (Disconnected status) from the admin page from time to time, you leave it alone for a few minutes, login again, and it will come back...

It broke my AiMesh system reboot (booting master and nodes in sync). And if I just boot the master node, a day or later the secondary node will disconnect itself from the master node from admin web page point of view. I can still get LAN connection to Internet on secondary node, but the admin...

Well it is a fan-less PC with 4-port i225v running pfSense that I am using, it does have VLAN support... and I still got a bunch of dd-wrt enabled old APs that I can use, should I want to expand the network with VLAN. :)

I have a pair of RT-AX3000 running as mesh (on ASUS official firmware) at home, and a RT-AX56U (on Merlin) at another home. Too bad AX56U is now EOL but I do appreciate at least Merlin managed to give us WireGuard VPN support. On the other hand, I know too much about ASUS way of putting...

Yes I am trying to upgrade my old TL-WDR3600 (single core MIPS-based running dd-wrt) to RT-AX56U, to re-use the same set of WG keys, to save time from updating every client conf on various devices with the new WG server public key.

As I am trying to migrate my existing WG setup from old dd-wrt router, I also want to know where the WG server private key is stored, according to https://github.com/ZebMcKayhan/WireguardManager#table-of-content it mentioned the files should be located somewhere around...