Recent content by speedbump

That is completely wrong and is disrespecting DD-WRT developers, if you had a clue what DD-WRT is capable of and how much work is involved in maintaining a completely custom firmware you would not say what you just did! DD-WRT is a fantastic firmware that works on modern as well as old routers...

Latest build: http://desipro.de/ddwrt/K3-AC/24200/dd-wrt.v24-K3_AC-NEWD.bin Have not tried to change the power output yet, currently set at default 71. I realize that could be using older broadcom wifi driver, but regardless, it's stable, works as suppose to.

FWIW, I just loaded my RT-N66U with Kong's version of the DD-WRT and I checked changing regions between North America and Europe, on the 5GHz I saw that in NA there were only about 6 channels, when I switched to Europe the list doubled or tripled. On 2.4GHz Europe has the extra 12 and 13...

Have you tried DD-WRT, I have been using DD-WRT on linksys wrt54g and asus rt-n16 for a very long time and found it very stable with loads of options. For the most part DD-WRT does not use the closed source drivers and allow for much more customizations, but looses hardware acceleration because...

For what it's worth I have tried to setup a a wan through my android phone on the rt-n66u with the latest firmware 43. My results are: 1) as soon as I plug the phone into USB the router resets the LAN, WLAN and USB ports, not sure if the whole router reboots, or just the ports get reset...

I tried to set up wan on USB with my phone Samsung Skyrocket (S2-i727) and could not get it working on RT-N66. I tried to set it up as a secondary WAN, primary WAN, etc and could not get it working. Any one have simmilar issues ?

OK, weird it works NOW.... properly, is there a delay before the script is active after boot ? I was able to get to this site but nothing that was added in the dnsmasq.conf.add file worked right after reboot

<continuation> Dec 31 19:00:31 pppd[515]: pppd 2.4.5 started by admin, uid 0 Dec 31 19:00:31 pppd[515]: PPP session is 1 (0x1) Dec 31 19:00:31 pppd[515]: Connected to via interface eth0 Dec 31 19:00:31 pppd[515]: Using interface ppp0 Dec 31 19:00:31 pppd[515]: Connect: ppp0 <--> eth0 Dec...

my log does not appear to have any errors, but does seem to show the entries several times. Dec 31 19:00:15 dnsmasq-dhcp[444]: DHCP, IP range 192.168.1.2 -- 192.168.1.254, lease time 1d Dec 31 19:00:15 dnsmasq-dhcp[444]: DHCP, sockets bound exclusively to interface br0 Dec 31 19:00:15...

AC68U I assume this did not require reset to factory defaults from 42_2, and I did not do it. but my dnsmasq.conf.add does not work and when I try to go to one of the addresses I get : Firefox can't find the server at www.pandora.com. This worked in 42_2, and here are the contents of...

Question 1: might be silly question but does installing optware/entware pose any security risks in it self ? Question 2: I know there is a simple port scanning website to see if there I have any open ports that I should not, BUT is there a site that does more than that to really see how...

perhaps it would also encourage asus to fix their original firmware seeing that in a custom version (bandaid or no) it works correctly....if they care

Thanks, the file was appended but the log did not like the line with cache-size=1500, once I removed and just left the lines with server=..... it works like a charm :-)

don't know what that is, I just copied the script from what you posted...

I also tried to make the file executable admin@RT-AC68U-C378:/jffs/configs# ls -l -rwxrwxrwx 1 admin root 538 May 13 2014 dnsmasq.conf.add and same thing. After reboot, I can not resolve any URL not the ones listed and not any other ones.