Menu
What's new
By:
Filters Better Search

Recent content by Sponge3245

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. S

    MoCA Adapter Not Working Help Please - Newbie

    If the amp is indeed the issue is there any possible workaround because I think finding and replacing it would not be possible.
  2. S

    MoCA Adapter Not Working Help Please - Newbie

    I just attempted to follow the cable plugged into the power injector and unfortunately it leads into the ceiling next to an air duct. It is completely inaccessible and attempting to find the amp would most likely include me tearing up a large portion of my basement ceiling. I do believe the amp...
  3. S

    MoCA Adapter Not Working Help Please - Newbie

    I have five different cable boxes in my house all having DVR capability except for one.
  4. S

    MoCA Adapter Not Working Help Please - Newbie

    Okay I have spent the day tracking down all the coax in my house. The central junction in my garage leads into the basement and from there coax is distributed to the rest of my house. Unfortunately when the basement was furnished much of the cabling was covered up and is now inaccessible. This...
  5. S

    MoCA Adapter Not Working Help Please - Newbie

    Also I am still confused as to why the coax light for the Actiontec adapter in the attic is able to sync. If I correctly swapped out the splitter in the central junction for a MoCA capable splitter wouldn't the coax light for Actiontec adapter in the office be able to sync and not the one in the...
  6. S

    MoCA Adapter Not Working Help Please - Newbie

    I was not able to find the other end of the RG6 cable. I do believe there is a strong possibility that there is a splitter somewhere in the wall, that makes a lot of sense. There is quite a large distance between the office and the attic with many coax jacks in different rooms along the way. In...
  7. S

    MoCA Adapter Not Working Help Please - Newbie

    Yes I have all the coax jacks from the wall connected to the adapter via the COAX IN port. I do not currently have the cable box connected but that is how I intended on eventually setting everything up once I confirmed the ethernet was working. Right now no additional devices are connected to...
  8. S

    MoCA Adapter Not Working Help Please - Newbie

    I performed that test a couple weeks ago when I initially received the devices. They both synced and everything seemed to be functional. However, I could try that test again to be certain. And when you say test the devices by having one in the office and the other in the attic, do you mean to...
  9. S

    MoCA Adapter Not Working Help Please - Newbie

    Yes I did try that and I was able to verify that both devices are functional.
  10. S

    MoCA Adapter Not Working Help Please - Newbie

    Thanks for taking the time to respond. I went ahead and made I diagram to the best of my ability. The attic is where I want to receive the ethernet connection and the office is where my modem/router is located. I tried two different arrangements in the office (shown below) neither will work and...
  11. S

    MoCA Adapter Not Working Help Please - Newbie

    Hi again, I ended up buying the Holland 2-Way MOCA Splitter 5-1675Mhz to replace my existing splitter in the central amplifier and the coax light will still not turn on. This is how I arranged my setup, coax jack -> adapter -> modem. That didn't work so I used a BAMF Bi-Directional MoCA...
  12. S

    MoCA Adapter Not Working Help Please - Newbie

    I found the RG6 cable in the coax jack in the attic which is where I want to install a wired connection. I didn't include a picture because it clearly said RG6 on the side.
  13. S

    MoCA Adapter Not Working Help Please - Newbie

    Thank you so much for the response I really appreciate it. Would something like this be sufficient? https://www.amazon.com/dp/B0113JAN8K/?tag=snbforums-20 and when I go to install the new splitter do I replace the existing one or attach it to one of the outputs?
  14. S

    MoCA Adapter Not Working Help Please - Newbie

    I recently bought two Actiontec MoCA 2.0 Adapters (ECB6200K02) and I have been having difficulty getting them to work. I installed one adapter in the office which is where my ISP modem (Technicolor XB3 DPC3941T) is located and one adapter in the attic which is where I want to receive ethernet...
See more
Top