Recent content by Stevens243

Dirty upgrade from 386.2_6. No issues to report from the upgrade. Thanks Merlin and the test folks!

Updated, no issues. Nice to see. Was beginning to wonder if this was an abandoned project. Nice to see it's not.

Dirty upgrade from 386.1B5. Seamless upgrade (first the mesh node/58U, then the router). All devices just reconnected and no untoward items in the logs and the radio and processor temps didn't change (47/69C which is where they've been since the end of northern hemisphere summer plus or minus...

OOOOWwww...my brain...it hurts ;)

I'm not sure that what you are seeing is due to the wireless check described above. My config is in my signature but I do not see that. I have connection priority set to wired for the mesh node and I only see my roomba in the wireless log (assoc and disassoc I'm sure since while it's connected...

Just be careful tho, those might cause high ping times. :eek: /S just in case this is needed here.

A couple of things: First, I'd recommend using the 88U as the router and the 58U as the mesh node. Then, I'd say get off the alfa. If you aren't at a point where you understand what a dirty flash is, best to stay on the final firmware and let the experienced testers evaluate the alfa and...

I'm confused. The modem was offline but they reset it and it came back online? Did you get a light on the modem? If you plugged the modem directly to the PC (and took the router out of the loop), did you have WAN access? If not, you aren't online and either the service is out or the modem is...

There is definitely more that just one problem drinker here <waves>

Dirty flash from .17. No issues. I did the mesh node (AC88U) first using the above link to the beta .trx file. Flashed fine. Unplugged the flash drive from the 86U (since I'm not feeling overly lazy today) and flashed the .18 Beta on it. No issues. Both the 86 and the 88U are up and...

You should be able to do what you are attempting. Try: resetting the 68U (long press the reset button on the back), then make sure that your laptop Ethernet is up/on. Once you can get in, then you should be able to set it as an AP.

If he is going to use one for AP OR AIMESH, it can run factory FW. Since he seems pretty content with his 87U and 66U A1 and is upgrading away from the 87U since it's "acting up" he likely won't need to spend the extra hundred bucks on the 86U. If money's no object, he should sell the 86U and...

He already has one 86U, so... My 2 cents is to buy the B2 since it's cheap, and install it as an AP and try mesh out it it's less than ideal. No sense in buying an AX router now unless you have AX clients or a burning need to spend money on them. Especially since you just bought an 86U already.

Dirty upgrade from .16. No issues. Thanks!

Ok, I've unwatched the forum, and all threads in the forum. There were some threads that showed up with "email" marked next to them when I viewed the list.