Recent content by summit

I am looking to upgrade the memory on a Dell poweredge R510 server, it is a duel processor unit, so apparently my RAM stack must reflect this to take full advantage of the duel processor, I was wondering if someone can confirm for me that the best RAM configuration in a tri channel machine would...

I am having trouble getting the right setting for my network connection. I would like to use both ports as a load balancing/faul tolerance and see that 4 of the settings will achieve this, I am unsure which is best. I have heard that some will increase your network traffic which I do not want...

Ahh I see the problem, that being said then, I wonder if you can use windows firewall on the actual computer you want the web traffic restricted to block port 80 then, rather than doing it at the router level, do it at the PC level through windows firewall or another third party firewall...

I would assume it has some sort of built in firewall, perhaps the easiest way to go about it is to block port 80 on the firewall for the internal network. If port 80 is blocked no web traffic will be allowed through the router, you can then apply 2 rules to your firewall to allow port 80 to be...

I am having trouble setting up a web folder in windows XP that can use FTP w/ SSL/TLS. The web folder will work fine when using the standard FTP protocol, but when I want to use the FTPS which supports the SSL/TLS, it keeps telling me that "The folder you entered does not appear valid. Please...

There must be something going on with this switch, as now when I enable the port trunking in any mode, it causes the network computers in network neighborhood to disapear, yet I can reach them manually, and the mapped drives still work, very strange. Also I figured I would post it in the same...

I did try to set it at 100 Mbps and 1000 Mbps manual with no effect, I also did this with the computer that dropped off the switch, I then tried to take another computer and put it into a different port on the switch, it also dropped access, once I put it back to the original switch port, got...

I have it on auto for the port speed on the switch, but I have since found out that I believe its a problem with the switch itself. If I plug the NAS into the switch on the back of the firewall it is discovered, I also tried it on another switch I had laying around and it worked as well, but...

I bought a QNAP TS-439U-SP and connected it to my Cisco SLM2048 switch and could not discover the NAS, finally I used a direct link to my pc and it was found and I was able to configure it with the proper IP settings. Once I put it back on the switch it could not be found once again, so to...

One final question, the TS-439U-SP is basically a rack mount version of the QNAP T5-439 Pro thats rated quite highly?

thank you, looks like I have my selection.

thank you, from my understanding the Buffalo Terrastation 3 is the lowest performer of the group, so if they are all able to do what I want I guess it comes down to performance vs price. I have priced them out to all within a few dollars, so I guess I should go with the best performer of the...

So I am in the market for a rack mountable NAS, and I believe I have it narrowed down to about 3 which seem to suit my needs well. What I have invisioned is to buy a 4 drive NAS, use 2 of the drives for RAID1 for critical data protection for our data server through a gigabit network connection...