Menu
What's new
By:
Filters Better Search

Recent content by supwiddiss

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. S

    Virtual Com Port Server Setup Help Request

    Don't know what really happened but it is working and I see Com 5 on my pc. I'm able to open the satellite motor control application and use it. For giggles, is your vhusbd.conf file populated? Mine is empty. Care to share what you might have in it? For the longest time the client application...
  2. S

    Virtual Com Port Server Setup Help Request

    Most of the errors are in screenshots above in my replies. I guess the assumption is that I (was) working in the root of my flash drive. Installing Entware and an FTP share changed that. I attempted to familiarize myself with Linux commands to simply reformat the drive. Surely not a task for a...
  3. S

    Virtual Com Port Server Setup Help Request

    As stated I do have the client installed on Windows 10 and it launches with no virtual com ports listed. This is getting a little confusing so could you please step back a bit and hopefully make things a bit more clear. I have a USB drive on the Asus router. It is formatted and Entware is...
  4. S

    Virtual Com Port Server Setup Help Request

    I knew that! A little different in Filezilla, but the same. Anyway. I located the .conf file and opened it in nano. Am I not supposed to be able to edit the com port number and icp/ip port from here? Read before I asked. I was able to run the vhusbdarm -c /root/vhusb.conf -i -b command. A bit...
  5. S

    Virtual Com Port Server Setup Help Request

    A success and a failure. Permission Denied. Searching the net for a solution to solve it. Nothing so far. In Enigma2 I could easily set permissions using Filezilla. Suggestions?
  6. S

    Virtual Com Port Server Setup Help Request

    Actually I do have Entware installed on sda1. I've also created an FTP share directory on it. "From what I can infer, you don't have anything on your USB flash drive (sda1), you can save vhusbdarm there if you like, i.e." Here is the directory structure of the flash drive and it showing in...
  7. S

    Virtual Com Port Server Setup Help Request

  8. S

    Virtual Com Port Server Setup Help Request

    Would love to try it. It looks like I can run 1 device on the free version. Problem is, how to choose the right version and how to get it installed on my router. From the looks of it once installed I change settings from the config text file. But to get it installed? And to get it running. I've...
  9. S

    Virtual Com Port Server Setup Help Request

    Looking for a little step by step from the Linux gurus to setup a virtual serial port over IP using a Prolific Technology Inc. USB-Serial Controller. It's an FTDI USB to DB9 adapter. It shows on my RT-AC68P when plugged into the USB2 port. I've installed Entware and I've been stumbling around...
  10. S

    RT-AC68P Bridge to Cisco E2000 Assistance Needed

    Hi all, I have a Belkin N300 router running stock firmware which is on an Asusmerlin RT-AC68P 380.68_4 Ethernet port. Currently the Belkin is used to throw a wifi signal to my garage terminated with a WRT45G running DD-WRT in bridge mode. It works good. I need to extend my wireless in the house...
  11. S

    RT-AC68U Asusmerlin and DD-WRT E2000 Wireless Bridge

    Hi all. New member here. Having some trouble getting a Cisco E2000 running DD-WRT v24 in bridge mode to connect to my Asus RT-AC68U with Merlin firmware. Currently I am using a Belkin router in front of a re-purposed Dish Net dish and corner reflector to blow a signal to my garage a couple...
See more
Top