Menu
What's new
By:
Filters Better Search

Recent content by tino

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. T

    [How-To] Link Aggregation/LACP on RT-AC68U/W/R/P

    Hello AtAM1, the reason why I've used "5u" at the robocfg vlan config is the following: robocfg vlan 1 ports "3 5 8t" # results to following vlan1 configuration at robocfg show (port 5 is tagged) 1: vlan1: 3 5t 8t robocfg vlan 1 ports "3 5u 8t" # results to following vlan1...
  2. T

    [How-To] Link Aggregation/LACP on RT-AC68U/W/R/P

    @pjalm: could you post the bond configuration of your NAS Box? Log in (telnet or ssh) to your NAS and issue following command: cat /proc/net/bonding/bond0 I've used the physical LAN Ports 3 & 4 on the RT-AC87U, because the internal mapping of Port 1 & 2 is a bit confusing. But the...
  3. T

    [How-To] Link Aggregation/LACP on RT-AC68U/W/R/P

    Hello AtAM1, the first success :) After some testing and "reverse engineering" of the port mapping within the robocfg command I've found out the port mapping: physical | robocfg ----------+---------- 1 | 5 2 | 3 3* | 2 4* | 1 WAN |...
  4. T

    [How-To] Link Aggregation/LACP on RT-AC68U/W/R/P

    Thanks a lot for your response! It fails when I try to add the vlans to the bonding/slaves. boss@RT-AC87U:/tmp/home/root# echo +vlan103 > /sys/class/net/bond0/bonding/slaves echo: write error: No such device boss@RT-AC87U:/tmp/home/root# echo +vlan104 > /sys/class/net/bond0/bonding/slaves...
  5. T

    [How-To] Link Aggregation/LACP on RT-AC68U/W/R/P

    Oh, what a blame. I'm looking forward to know them :) the original ifconfig (after reboot) is: boss@RT-AC87U:/# ifconfig -a aux0 Link encap:Ethernet HWaddr 54:A0:50:E5:1E:F8 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:250 errors:0 dropped:0...
  6. T

    [How-To] Link Aggregation/LACP on RT-AC68U/W/R/P

    Hello I've tried it with following environment: - Router Model: AC87U using ports 3 & 4 (Physical LAN Port 1 & 2) - Firmware: Asuswrt-Merlin 376.49_4 with JFFS enabed - Counterpart: Synology DS412+ (DSM 5.1-5021 Update 2) This is the original configuration of the Router...
  7. T

    LAN Port Status on Command Line

    I've found an interesting information with the robocfg command. Does anybody know the mapping of the port numbers? boss@RT-AC87U:/tmp/home/root# robocfg show Switch: enabled Port 0: 1000FD enabled stp: none vlan: 2 jumbo: off mac: 00:01:5c:31:4f:3c Port 1: DOWN enabled stp: none vlan: 1...
  8. T

    LAN Port Status on Command Line

    Hello, is there any possibility to check (e.g. connected) or change (ifdown) the status of the LAN Ports. On my RT-AC87U with Merlin 376.49_4 i could find following interfaces: br0 (seems to be all Ports) br0:0 eth0 (seems to be the WAN Port) eth1 (seems to be the WiFi Port) lo ppp0...
See more
Top