Recent content by ToasterPC

Hey there! I was finally able to segment my network using the guest SSIDs of both my GT-AX11000 and my RT-AX86U on AP mode (both HND, non-Pro models), though I had to disable AiMesh in the process (so far, no major issues). However, I've been trying to add VLAN tags to the individual Ethernet...

In that regard, I might have some good news. I'm still banging my head on the desk trying to give the Ethernet ports individual tags, but at least on the wireless front all of the guest networks come up correctly now using the following script: #### Info...

Hey there! I've been up all night banging my head against this problem. I'm trying to get both a GT-AX11000 and a RT-AX86U (both running Merlin version 3004.388.5_0) to work using a 2.5GbE backhaul for AiMesh in AP mode with separate VLANs for each of the Guest Networks, but so far, the GT has...

Hey there man! I've got a setup that's pretty similar to yours (OPNSense on Proxmox node with 4 VLANs going to a GT-AX11000 and a RT-AX86U, both in AP mode with the 2.5GbE ports as an Ethernet Backhaul through a Layer 2 unmanaged switch). Is there any chance you still have the scripts around...

It worked perfectly! Thanks!

Hey! Just found your post and I'm having the same permissions issues. total 172 d-w------- 5 700 root 4096 Apr 12 07:59 . drwxr-xr-x 3 orpheustelos root 80 Apr 12 07:36 .. d-w------- 3 orpheustelos root 4096 Apr 12 07:42 .config --w------- 1 orpheustelos root 57 Mar 18...

I see, fortunately the link was tested and sustained using Cat8 cabling before going into the keystone jacks, and using weatherproof Cat5e for the intermediate connections of the keystones, and then Cat8 for the keystone to router/switch seemed to work correctly. I was mostly wondering if there...

Hey there, long time no see. I've moved my router suite over to a Raspberry Pi 4B running OpenWRT, and kept my GT-AX11000 as an access point for the entire floor, then cabled with Cat5e the entire house, and put an RT-AX86U downstairs as another access point using a network switch to connect...

Hello there! Been using x3mRouting successfully for about a week now, but I can't seem to be able to wrap my head around something. Tunneling through two VPN clients pointing to PIA in the US and Spain I'm able to route different services through the respectively desired routes, but after...

Thanks! After testing with 1.1.1.1 and having it work, I tried setting the router's LAN IP address on both wgm and the client, them restarting the peer interface from the manager, and since I'm able to browse and send this reply, I'm thankful to say it worked :D . Truly, thanks for all your help!

Hey there @Martineau ! Just wanted to tell you how grateful I am for the script utility you developed (tried to reply but it seems the thread was too old) It managed to drop the deployment time from my RPi in 40 minutes to about less than 5 :D ! The test device worked pretty much instantly...

Ah well, at least it saved me the headache of looking for it. Thank you for replying! I'll see if I can find anything on oFW then.

Hi @RMerlin, I've been trying to use said command to turn off all LEDs, but it seems not to be working. I was able to find through the GT-AX11000's web interface that the command to disable the topmost logo LEDs would be the following one: nvram set aurargb_enable=0; service restart_aurargb...

I'll go ahead and bump the thread, it seems that the Raspberry Pi is able to successfully ping through IPv6 while no other device in the network can. PING ipv6.google.com(qro02s15-in-x0e.1e100.net (2607:f8b0:4012:80b::200e)) 56 data bytes 64 bytes from qro02s15-in-x0e.1e100.net...

Being honest, I'm not quite sure if the person that helped me over at the ISP help desk really understood what I was asking for, which is why I thought about asking around (for context, the last time I called they wanted me to pay for an enterprise bill to enable bridge mode). When I perform a...