Recent content by Traveler2100

IT sounds like exactly the same problem and the same router. I have a GT BE 98 Pro, LAN ports could not talk to each other but connect to the internet fine. I didn't notice it for a couple days and it took a bit to connect it to the firmware upgrade. I could reach web pages and the like from...

When I upgraded to 3006.102.5 my router's 2.5G LAN ports quit communicating with one another. I have two 2.5G and two 10G ports active. Each 2.5G port could communicate with the 10G ports but could not talk to each other. One 2.5 port has 3 aimesh and 9 cameras on it and a NAS on the other...

After upgrade some ip addresses not available to a NAS on the 2.5G port LAN 3 on GT-BE98 Pro. IT is not something I have seen before. Moved NAS to a switch connected to 10G port on the router and all ip's available. I could not find anything in the logs so I went back to 3006.102.4 and...

Ok Colin, SMB test include hard disk speeds and file sizes so I havent a test I was happy with, but I'll get a good test. I thought iPerf was better since it is all in memory. As for the router CPU, I can't imagine a transfer to the router is more CPU intensive than a transfer thru the router...

Hmm, maybe it is something with the router. Computer C is 1G wired directly to the router. iperf3 computer C to the router is ~940. Computer C to the 10G computer A is ~840Mbits. so C to A is 2 to 3 times faster than B to A or iPad wireless 6 to A. So the 1G connection acts pretty much as...

Thanks all, I did do a factory reset but I did a backup first and then a restore so it isn't completely clean. CPU usage seems normal, one core near 50% the others lower. I have more surprising results. on a current model iPad Pro connected to WIFI 6, I pull about 850/900 Mbits/s on an...

A have a GT AXE-16000 running Merlin firmware 3004.388.3_2. I have a desktop A connected with a 10G card and a desktop B connected to a 2.5G switch which is connected to the other router 10G port reporting a 2.5G connection. iPerf3 speed to/from desktop A to the router is ~3G and desktop B...

Thanks New. You are right it does work. In fact, setting the DNS in VPN Fusion exceptions for the TV's work for me. The DNS entry in LAN that you suggested, is used instead of the VPN DNS for clients that no other DNS is specified. That helps but the VPN Fusion Default and Exceptions do not...

Well, I don't know what VPN Fusion related bugs they fixed but the DNS issues are not fixed. I do not understand why all traffic has to be routed though one DNS address. It renders VPN clients useless for people with TVs that use streaming services like Amazon Prime and Netflix or use DNS...

Thanks for the Advice L&LD and Rolo. I did not do a factory reset as I do not see a need since there is no mention of changes in these areas in the changelog and the router is heavily used and configured. As for the feedback tool, I don't see these 2 items as faults in as much as they are...

Does not appear to have fixed the two issues I was hoping would change, the loss of 5.2 band due to dedicated 5.2 backhaul and the VPN DNS issue that seems to be a problem for many. I am disappointed that after all of the online discussion, Asus doesn't seem interested in fixing these issues...

Sounds interesting, I'd be interested to hear how they work out. I am using MoCA 2.0 adapters connecting the GT5300 to switches and end devices like TVs, over the existing Coax running to each room for cable TV. I am getting about 800 mbps and it doesn't interfere with the standard cable TV...

I bought a GT 5300 for the quad core and AImesh. I like the router and it’s power for my large network but I’m frustrated with the firmware peculiarities like losing the 5.2 channel to backhaul when I have wired backhaul and VPN Fusion DNS issues. I can’t use VPN because all DNS queries are...