Recent content by Tvbaas

First enable the "Ethernet Backhaul Mode" on your Main router.

Did you follow this guide ? It is written for AC68u that has default 192.168.1.1 ip adres. I guess the ET/XT12 does have 192.168.50.1 . Where you able to put the router into "rescue mode" as mentioned in the guide?

Did you already try to use 192.168.50.10 with the ASUS Firmware Restoration tool? If not, just give it a go...

Reading through the forum a lot of people had some kind of issue when using USB sticks, most of them turned over to a USB SSD drive which do seem to work more reliable. I also experienced issues with USB sticks, they died to soon or encountering all kind of vage and slowing down issues. So I...

What kind of USB storage are you using to run Skynet+Diversion+Entware on?

@Xeyrruken Does your ISP require this setting to be enabled? There is a rather old thread on the meaning of this setting. If it is not required by your ISP, did you already try to set it to "No" and see if it has any impact in your situation ?

What if you first disable "Smart connect", try to enable for both 2,4 and 5 the option "Target Wake Time". If that is successful , enable the "Smart connect" and check the GUI status again.

It should block all the extra domains , in total now 612581 ....

Below the steps to add the second hosts list : https://nsfw.oisd.nl/dnsmasq2

So what you observe ; with all QoS functions disabled you still see activity in the "Bandwidth Monitor" when opening the tab "Adaptative QoS" and at the same time those kernel messages do show in the logging? With my AX88u and latest firmware I have exact the same behavior and the same messages...

As mentioned in my signature i am running a AX88u on 388.4. When checking the directory /opt/bin/ ,i don't see a file called nproc . For entware i just installed it directly from amtm Will try your feedback and let you know the outcome. @SomeWhereOverTheRainBow Update ; checked both...

Just did a new install of AG v1.6.7 and noticed following during installation: Info: Writing AdGuardHome configuration... Info: Checking AdGuardHome configuration... Info: Starting AdGuardHome... /opt/etc/init.d/S99AdGuardHome: line 9: nproc: not found Checking AdGuardHome...

After installing the 3004.388.4_beta1 , my DDNS has trouble to be set automatically after a reboot. I am using NO-IP as DDNS service and only for IPv4. Don't know if this is related to this FIX. Aug 1 19:30:57 ddns: eth0 not find External WAN IP, go retry.(10) Aug 1 19:31:01 watchdog: start...

Is it the time/date which is showing in the screen shots that worries you? Well ,that is just the time/date the firmware has been build, it is not the current time/date.

In the Asus attachments i could not see you did reconfigure the gateway IP address of the Asus router, if you did then my assumption are indeed incorrect.