Recent content by Unisoft

  1. U

    In some dire need of assistance (AX86U)

    I had issues with Huawei devices working one minute and then not the next or Access denied issues with 3 AX86U. To cure, I already had Airtime Fairness and Universal beamforming set to OFF. I have WIFI6 AX so didn't want to disable it and I set it as "20/40/80/160" Beacon Size 300, DTIM 3 -...
  2. U

    5.0 GHz Channels in the UK

    On the AX86U and 160mhz also active, mine won't connect. Two of these routers in different locations, with two different TIVO boxes. I tried various channels over 48. This was on Merlins firmware, but was the firmware just before the latest one. I'll try again and see if Asus had changed...
  3. U

    DNS privacy configuration

    I use cloudflare in that DNS field (not using auto) and cloudflare family for the DNS over TLS DNS ip addresses. As well as DNSSEC enabled I also select Rebind Protection as well. To test at cloudflare you have to disable temporarily the DNSSec as it cant seem to test with that On. DNS ipv4...
  4. U

    5.0 GHz Channels in the UK

    Just an FYI: If you have Virgin Media TIVO/v6 connected to WiFi - it can only deal up to channel 48. Anything over and it doesnt see the WiFi. I tried because I like mine in an isolated WiFi rather than unrestricted LAN port.
  5. U

    Release Asuswrt-Merlin 386.4 is now available

    FYI. In todays firmware release from Asus for AX86U v3.0.0.4.386.46061 they have fixed a bunch of security related stuff and the IPv6 DDNS issue. Merlin may already be at work behind the scenes lol
  6. U

    Release Asuswrt-Merlin 386.4 is now available

    I have an AC86U, its replaced by using AX86U now. Anyway, when I was using it, I had a problem where the DHCP address could take 10 seconds to be issued (even if reserved addresses used) and 30 seconds to connect to WiFI. The DHCP issue didn't affect all devices, but at the time my Windows...
  7. U

    Release Asuswrt-Merlin 386.4 is now available

    Ok, thanks. I'll leave it as enabled.
  8. U

    Release Asuswrt-Merlin 386.4 is now available

    This has confused me :) So for DNSSec, do I need to set the GUI option for it to NO (I have YES at the moment)? I have 'Connect to DNS Server automatically' set to NO and use Cloudflare IP instead and also use DNS over TLS using Cloudflare (family). I've not got any other addins loaded at...
  9. U

    Release Asuswrt-Merlin 386.4 is now available

    Thanks RMerlin for all your work. Three AX86U upgraded here and no problems (can't test WAN Ipv6 as all ISPs are IPv4 still, and one that was IPv6 has changed to another provider who isn't). No-IP DDNS updating fine.
  10. U

    Beta Asuswrt-Merlin 386.4 beta is now available

    No_IP works fine on three AX86U routers - two of which on different WAN. Lets ENcrypt gets the cert too and its all HTTPS. Its IPv4 not IPv6 on these. I changed from dnsomatic after they had issues past couple of weeks and I got fed up with it, initially thinking it was an alpha build issue but...
  11. U

    [ 386.4 alpha Build(s) ] Testing available build(s)

    Works on 3 AX86U for reference. I had to transition from dnsomatic due to issues their side back to No-IP and it works fine. I have an AC86U as well, but haven't tested that as yet. Merlin had updated inadyn for ddns.
  12. U

    [ 386.4 alpha Build(s) ] Testing available build(s)

    OK couple of questions about this one. When set to AUTO, the field for "802.11ax / WiFi 6 Mode" appears - I thought this was 5ghz only and shouldn't appear for 2.4ghz? Why does "b/g protection" appear ticked when you tick "Disable 11b"?
  13. U

    [ 386.4 alpha Build(s) ] Testing available build(s)

    Because there were issues before like access denied randomly on Wifi and for my parents on Ipv6 there was an issue with Dual WAN. These are home environments not business ones. I wouldn't normally run an alpha otherwise - there was such a delay between last GA firmware and test ones again...
  14. U

    [ 386.4 alpha Build(s) ] Testing available build(s)

    ah ok thanks. Maybe not a firmware issue this time then and an operational issue with OpenDNS/DNSOMatic.
  15. U

    [ 386.4 alpha Build(s) ] Testing available build(s)

    Can a build not be done just to fix the dnsomatic issue please? Looks like weeks for a big build update because of an Asus WiFi issue, but dnsomatic is a pain in this build (if you have several hosts and update each one) and don't want to roll back as the alphas are better with WiFi generally on...
Top