Menu
What's new
By:
Filters Better Search

Recent content by varakiro

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. V

    Do I need updated equipment

    Thanks for all the help much appreciated. Turns out that the good old AC68 is still up to the task, I just replaced my old SB6141 cable modem with a brand new SB6183 from Amazon for $53 and change and here are the results which are well above the advertised 300 Mbps Cox plan...
  2. V

    Do I need updated equipment

    I turned the Nat acceleration back on but I couldn't find Tools > Other Setting for Traffic monitoring. Thanks.
  3. V

    Do I need updated equipment

    I already had the QQS and parental controls off, I found the ip traffic monitoring but didn't see any options to enable or disable it.. I also turned off Nat acceleration should I turn it back on? Thanks.
  4. V

    Do I need updated equipment

    I've had the AC68 since 2014 without a single hitch or a problem, so I applied why fix it if it ain't broken and didn't even update the original firmware. It consistently exceeded my expectations and my ISP advertised previous plan speeds 100 Mbps and later on 150 Mbps but not the 300 Mbps. Do I...
  5. V

    Do I need updated equipment

    Thanks for the reply, so I can still keep the Asus ac68 and any suggestions for a new cable modem
  6. V

    Do I need updated equipment

    Greetings to all. I have Motorola SB6141 and Asus AC68R, I recently upgraded my Internet plan to 300Mbps from 150, and the max speed I am able to get is around 270Mbps, before when I had the 150Mbps plan the speed tests will consistently exceeded 150 and were always around 170Mbps. Should I...
  7. V

    [Official Release] AiMesh Firmware v3.0.0.4.384.10007 for All Supported Products

    Can this firmware be used for ASUS RT-AC68R. Thanks
  8. V

    ASUS RT-AC68R

    I have been using the ASUS RT-AC68R with it's original firmware and zero problems. The only issue I can't figure out is the wireless log messages that says. kernel: br0: received packet on eth1 with own address as source address. They flood the log everyday, finally I thought about the...
  9. V

    ASUS RT-AC68U Firmware version 3.0.0.4.374.4561 is out

    With the latest defective firmware. The System up time on mine was 24 days+ but now the last two days at least 3-4 reboots everyday. Do this things go bad by themselves in a month or what, I'm puzzled now.
  10. V

    Duplicate address msg

    I paid attention to the logs and in my case this message appears when my laptop wakes up from standby or when the browser quits on a website that does not work. Sent from my iPhone using Tapatalk
  11. V

    ASUS RT-AC68U Firmware version 3.0.0.4.374.4561 is out

    Thanks Merlin System uptime shows 10 days 23hours 15minutes 17seconds. I guess the messages about. kernel: br0: received packet on eth2 with own address as source address. Is not a big deal and despite the lousy firmware the router is OK. The speed and coverage of this router is...
  12. V

    ASUS RT-AC68U Firmware version 3.0.0.4.374.4561 is out

    When I look at the system log, what is the message to look that indicates a reboot.
  13. V

    Duplicate address msg

    I have the same messages on AC68R and my setup and network is as simple as it can get, Motorola SB6141 cable modem to ac68r which I use in wireless router mode and is the ONLY router at home. However I carried the same name for ssid from my old wrt54gs, is that why maybe? Sent from my...
  14. V

    ASUS RT-AC68U Firmware version 3.0.0.4.374.4561 is out

    Greetings to all from a newbie to the forum and to anything that Asus Makes. Although it was still working perfectly I upgraded from my Old faithful WRT54GS to RT-AC68R During the setup it made me download and install the latest firmware, I have bunch of entries in the System Log as pasted...
See more
Top