What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by webcan

  1. W

    Having trouble accessing second router via computer?

    PS: for testing purposes I disabled my router firewalls. ( Once everything is working then I will enable them one by one )
  2. W

    Having trouble accessing second router via computer?

    If I do choose to put the Router 1 in AP mode ( and leave Router 0 in Router mode ) do I connect Router 0 to the Router 1 Lan port or Wan port?
  3. W

    Having trouble accessing second router via computer?

    1: Yes the routers are in the same building, And its NOT necessary for tenants to access the cameras directly ( they connect to blueiris webserver for cameras on the PC -- from blueiris I control access). 2: I need for the WIFI cameras to access the pc webserver though. which means they connect...
  4. W

    Having trouble accessing second router via computer?

    Router 0: (assuming it has IP of 192.168.1.1 and 192.168.3.2) I am not sure where 192.168.3.2 would go? is this in the LAN section or WAN section?
  5. W

    Having trouble accessing second router via computer?

    I am using a Asus RT-N66U with its native firmware..( was using dd-wrt before but too many issues with this router and dd-wrt ).. Native fireware is solid.. Here is my Main router settings for LAn and Wan
  6. W

    Having trouble accessing second router via computer?

    HI! Thank for responce, 1: I still cannot access the router 1 via my main computer and now I cannot access either from my laptop via WIFI and my Access point to is now in Repeater mode. 2: However now the WIFI camera is now working again in Blueiris server which indicates that info from WIFI...
  7. W

    Having trouble accessing second router via computer?

    I had this working before thought. and I did not play with nats tables or anything..
  8. W

    Having trouble accessing second router via computer?

    HI ! I have 2 router in series that Wan to Lan where as my primary router has in lan port connected to the secondary wan.. For some reason I cannot access the secondry from my browsers 192.168.3.1 ( primary is 192.168.1.1 ) In order to connect to the secondary router I have to either conncect...
  9. W

    CFE bootloader update

    Thank you very much :) Paul
  10. W

    CFE bootloader update

    Where do we enter in these commands? in the browser bar as eg. 192.168.1.2 # strings /dev/mtd0ro | grep bl_version or via the GUI in an admin section ?
  11. W

    Where do we see the bootloader info?

    HI! solved one ussue only to be onto another that I solved as well. NOTE: YOU MUST COPY THE FILE OVER TO YOUR ROUTER FIRST THEN EXTRACT WITH TAR OR THE PERMISSIONS WILL GIVE YOU ERRORS. Once you have extracted the files on the router then you may proceed to execute the script. after...
  12. W

    Where do we see the bootloader info?

    Thank you very much for clearing that up. I did installed WINSCP and connect using SCP protocol. 1: Where do I look for the old CFE file? or does your script take care of that? I have your file in unpacked in G:\1\ IN Winscp there is a "Open terminal" under Commands in the menu items, is this...
  13. W

    Where do we see the bootloader info?

    Found it, using the merlin version I found it under Tools>Sysinfo My bootloader (CFE) is 1.0.1.2 So now I need to update it to 1.0.1.3. Is it true that there is a version of merlin that updates the bootloader automatically upon flashing? or do we still need to do this manually? Thank...
  14. W

    Where do we see the bootloader info?

    HI! I just loaded to the merlin version Rt-n66u_3.0.0.4_270_26b.trx and now I want to check what version of the bootloader I have. to see if its the 32 or the 64 version. PLEASE HELP ME I have been reading for about 4 days and still not cannot find a clear answer. ( I must have over loaded it...
See more
Back
Top
✖