Recent content by wer4mu

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. W

    MOCA Network Issue

    Update: disconnected the 2 unused Dish coax lines and the splitter they were connected to, and reconnected the line from the house (House Coax 5) back to the main splitter and BANG the adapter is now working with the splitter in-line! Looks like it was the way this line was connected that was...
  2. W

    MOCA Network Issue

    Today the Cable Modem and Phone Modem are both connected to the isolated coax line with a splitter. If I move the Cable Modem to a different room, and also move the corresponding isolated coax line, will the phone modem continue to work if not on the dedicated isolated line?
  3. W

    MOCA Network Issue

    What do you recommend for 6-way MOCA Splitter, 75-ohm terminator, and “PoE” MoCA filter? What about if I move the cable modem, do I need to move the direct feed to the appropriate Coax line?
  4. W

    MOCA Network Issue

    Splitters: Onn. Digital Coax 2-way splitter (5-2500MHz) Extreme BDS102H 2-way splitter (5-1002MHz) If I use either of these splitters in another room of the house I get connectivity with the MOCA adapter and internet test speeds are +280Mbps. To answer above: no longer using Dish and do not...
  5. W

    MOCA Network Issue

    I don't see anyplace on MOCA adapter interface to see power readings but I have uploaded what I do see when connected without a splitter and when not connected with a splitter.
  6. W

    MOCA Network Issue

    Ok, updated my drawing to include Cable box. There are 6 feeds going into house but I only know of 5 coax wall connections - I will have to figure that out What kind of tester do I need to get to figure out what cable run goes to what room? Thanks for all your help!
  7. W

    MOCA Network Issue

    I own the cable modem - Netgear CM500 (DOCS 3) - picture attached with ranges
  8. W

    MOCA Network Issue

    Demarcation Box picture attached 1. Main connection (orange cable) comes into POE splitter 2. POE splitter is connected to splitter that has back plate showing - which is connected to one of dedicated runs (not sure why this is instead of just going to main splitter?) 3. Dish cable (from bottom...
  9. W

    MOCA Network Issue

    Network diagram attached. 2 Coax connections Upstairs which is where Cable Modem and main switch reside. Dedicated runs from Cable Demarcation box (located outside) to each room. Living Room is the only room I am having issues. Living Room with no Splitter: able to get connection between two...
  10. W

    MOCA Network Issue

    Moca 2.5. The adapters are Gocoax - just got them. I have 2 different splitters and they work on any other coax outlet in the house except this one so I know the splitters are good. I have checked the cable connection to the wall outlet and it is tight. Also, if I use the adapter without a...
  11. W

    MOCA Network Issue

    Having an issue with trying to setup MOCA network in house. I have one coax outlet that will not work with a splitter. If I connect the MOCA adapter directly to the outlet, I get connection without issue. If I introduce a splitter, then the adapter does not get a connection. I have used...
Top