Recent content by whodiini

I read the Moca brochure and it helped me understand a bit more. Putting the POE filter at the splitter input acts as a mirror for the signal and effectively doubles the signal strength. For just 3 coax, it probably doesnt matter - I happened to have a moca 2.5 splitter 1 input 2 outputs, so...

Thank you for the clarifications on the different splitter toplogies. It really helped me understand what options you were communicating. From what I read, putting a POE filter along with a termination at the splitter input helps with reflections. But what about the comment that the input...

OK. So I tried a bunch of stuff. Attached is my final (current) config. The netgear mesh shows that the backhaul is using the wired backhaul, not wifi. What I discovered is that even though the moca network has no direct connection to my router all the satellites AND the hardware attached...

well it turns out that one of my potential moca connections is in a very inconvenient place that will take a while to get to (requires lots of bookcases movement to get to the cable outlet.) So I need to do something in the meanwhile at that location. Attached are 1d and 1e options to bypass...

Thank you. I was reading somewhere that the speeds between the output to Moca on a splitter are slower than from input to output. If so, should the moca from the main mesh unit be connected to the input to the splitter? Also you mentioned that a POE filter should be added to the input on the...

now I am confused. Config 1b seems the simplest. But I am at a loss how to connect the splitter. All the topology examples linked looked like my original config 1 where the input coax was split along with the Moca. Per your suggestion, I did config 1b and removed the splitter and broke the...

Taking config 1b, with the moca splitter - I looked at your recommended moca splitters and not sure how to hook it up. The moca splitters have 1 in and X out. In config 1b, all three legs seem equal, so not sure which one should connect to the "in" on the splitter. On config 2b - the netgear...

Yes, of course! The splitter amp was there when I had cable TV and never removed it when I canceled cable TV. But since I dont have cable TV any more, its no longer needed. So do u recommend 1b or 2b (attached)

I am attempting to establish a Moca backhaul from my Netgear RBR50 to my two RBS50 satellites that I use as wireless AP. Attached is a wiring diagram that I wonder will work. (config 1) The Moca just connects to each router and satellite without a switch or network. Since the netgear says that...