What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by wouterv

  1. W

    Release ASUS RT-AC68U / RT-AC66U B1 / RT-AC1900(P/U) Firmware version 3.0.0.4.386_52062 (2025/10/27)

    Did a dirty (online) upgrade of the loyal router.
  2. W

    AC68U. Android phone battery drain on 2.4 band. I found a solution.

    I am lost in what you try to say or explain or ask. I do read about a battery drain issue with your phone when connected at 2.4 GHz, what make you think it is related to the router instead of the phone?
  3. W

    Can one change WAN port to LAN port not using AiMesh and router in AP mode (not the default, initial mode).

    I did a quick test, using my spare RT-AC1900U with firmware 3.0.0.4.386.52048. Set the RT-AC1900U in Access Point (AP) Mode: For my own convenience set it to manual IP: 192.168.1.1 is the RT-AC68U Main Router. Then hardwired the WAN port of the Access Point to one of the LAN ports of the Main...
  4. W

    Asus DSL-AC68U

    Please be a little more specific of what you did to your DSL-AC68U to make it like a RT-AC68U. In the RT-AC68U with ASUS firrmware there is this page: Advanced Settings > Administration > Operation Mode In the above I clicked Repeater mode and it shows you what the selected mode does. After...
  5. W

    After entering the website, I am partially logged out

    Try this website: https://demoui.asus.com/index.asp It is the demo GUI from ASUS which to me shows completely, there is also a system log (dated December 31), most settings you can change, some settings won't work as that is the demo restriction. I don't know if the code is the same as real or...
  6. W

    After entering the website, I am partially logged out

    I agree with the above post. If you see the same behavior with different (ASUS-) routers on your computer(s), the issue seems related to your computer and / or browser setup, most probably you have set the browser(s) to block certain features. I am using Firefox on different computers (Windows...
  7. W

    No Signal on two of the four router bands

    It leaves the already given conclusion power supply or router fault.
  8. W

    No Signal on two of the four router bands

    I suppose you have checked the "Txpower adjustment" in the Advanced Settings > Wireless > Professional Tab for both frequencies? If that is set to Maximum or Performance level, I would try a reset to factory defaults and manual configure the bare minimum to get Internet access: Router Login...
  9. W

    After entering the website, I am partially logged out

    I suppose the main issue is the high (practically 100%) RAM usage of the router, even if that is not always the case. As already mentioned one known "natural" cause for high RAM usage is intensive use of the Samba server of your router. The GUI web server runs on a low priority: if the router is...
  10. W

    Release ASUS RT-AC68U Firmware version 3.0.0.4.386_52048 (2025/08/19)

    Uhm...that is what I have seen in my retired Media Bridge as well. It seems with all the fixes ASUS broke the non "Wireless router mode / AiMesh Router mode", causing those wireless restart issues. The issues my Media Bridge suffered began one or two firmware upgrades ago and were too infrequent...
  11. W

    Release ASUS RT-AC68U Firmware version 3.0.0.4.386_52048 (2025/08/19)

    In the first place as general security concern it is advised to not use UPnP. The Media Bridge setup with the RT-AC68U as main Router has been stable for us for many years, starting with an old RT-N66U as Media Bridge, in 2021 I replaced the the RT-N66U by a new RT-AC1900U. Some time ago, I...
  12. W

    Another 3.0.0.6 quirk, using bridge devices

    The Domain Name field is empty by default anyhow, I always left it empty.
  13. W

    Another 3.0.0.6 quirk, using bridge devices

    From my Media Bridge experience (RT-AC1900U bridged to the RT-AC68U router): In the Rt-AC68U Router 3.0.0.4.386.52048: Advanced Settings > LAN > LAN IP > IP Address = 192.168.1.1 Advanced Settings > LAN > DHCP Server > IP Pool Starting Address = 192.168.1.3 (because the Media Bridge will get IP...
  14. W

    RT-AC88U admin credentials stopped working

    Also upgrade the router to the latest firmware and manual configure the router after the set to factory defaults.
  15. W

    RT-AC88U admin credentials stopped working

    A little more history background can be useful for serious help: Did you keep pace with the firmware release for you RT-AC88U (the latest seems 3.0.0.4.386_48322 dated 2025/03/17)? When was the last time you was able to login to the router GUI? Do you have Web Access from WAN enabled in the...
See more
Back
Top
✖