Recent content by WTOram

Well. I am using the 2.5G WAN/LAN port for my WAN and both the 10G port and the SFP+ port (with a multi-rate 10Gbe capable twisted pair module) on my LAN. ethtool appears to confirm that both eth0 and eth9 are 10Gbe ports: wade@Hagrid:/tmp/home/root# ethtool eth0 Settings for eth0...

With the 3006.102.3 Merlin firmware on my RT-BE88U, I am still having the same issue that I had with the initial 3006.102.2 beta which I didn't have with the stock ASUS software ( migrated from stock 3.0.0.6.102_37103 with a full system reset after install). I cannot get IPv6 working with...

Just after my last post, I set up a new broadband quality monitor uaing my Asuscomm.com domain name. After 5 hours, this is what I see: As you can see, within the last 5 hours there have been 4 periods (including the last failure which has not yet fixed itself) when the DDNS domain has not...

I run a pair of Thinkbroadband.com quality monitors 24/7 - one for Ipv4 and one for ipv6. In the past, I have tried to use my asuscomm.com DDNS FQDN for the ipv4 monitor but now (and for the last year or so) I just configure it with my ip address directly because, when using the domain name, the...

I would imagine that when ASUS issue a GPL release newer than 3.0.0.6.102.37000 for a router or a (set thereof), then that will be picked up by a subsequent asuswrt-merlin release. At that time, I would imagine that the need for the nvram firmware block bypass will dissappear - at least until...

I was just looking at the changelog for the Merlin 3006.102.3 pre-beta test build for the GT-BE98PRO and I found this which might help: Note: I have not tried this. For the time being I am happy on the stock 3.0.0.6.102_37094 firmware although I shall be looking to move to Merlin firmware at...

I have just had an opportunity to reboot my router (without invoking cries of complaint from the rest of the household) and I can confirm that, for me at least, the stock 3.0.0.6.102_37094 firmware has resolved this issue.

My router automatically upgraded itself to 3.0.0.6.102_37094 a couple of days back and must have rebooted as part of that (my dynamic ipv4 address and dynamic ipv6 prefix both changed at the same time) but I did not notice any failure to start the WiFi service correctly so maybe something has...

I have this issue with my RT-BE88U running stock firmware (originally 3.0.0.6.102_33921 now 3.0.0.6.102_33928). For various reasons, documented elsewhere on this forum, I have performed full resets multiple times but it has not made any difference. I have a workaround. Every time I reboot the...

I think that WiFi6 (802.11ax) is being confused with the WiFi carrier frequency bands. The RT-BE88U (WiFi7 - 802.11be) is compatible with WiFi6 devices but it does *not* provide the extra 6GHz WiFi band introduced with WiFi6E. WiFi6 devices do not support the 6GHz band. WiFi6E devices do...

Unfortunately, I have had to go back to using the stock ASUS software because, even with a hard reset of the router an setting up from scratch, I have been unable to get IPv6 working. Reverting to stock fixed this IPv6 issue. However, I had problems with IPv6 when I first got the router - my...

Just another data point: Beta 1 appeas to be running without issue on my RT-BE88U. The only issue that I currently have with this router (which is present with both the latest ASUS firmware build 33928 and with asuswrt-merlin 3006.102.2_beta1) is that, after a reboot of the router, I have to...

Well this is strange: Today, I went back to using the RT-BE88U as my only router (RT-AX88U removed and powered off) in order to pursue an ASUS support request. As part of this I did: * Another full reset (probably unnecessary) * Completed the basic internet setup wizard (WiFi...

Hello, I tried the factory reset, went through the initial establishment of the internet connection (PPPoE with BT login details), WiFi SSID and password settings, and router admin login settings. This, as expected, estblished my internet connection but with no IPv6 enabled. I subsequently...

My ISP does support IPv6 - albeit with a dynamic IPV6 prefix - which changes every time I sneeze :( As I said above, I am currently using my RT-AX88U (Latest Asuswrt-Merlin firmware) to manage the ISP connection and the RT-BE88U to provide connectivity. This works fine with IPv6 and an IPv6...