Recent content by zvirus

Hi, My new purchased R7000 is having this issue: Turned on... only four (at once) of the ethernet port leds are flashing. I can only ping router for short amount of time. Serial port does not work. Again.. Power led NEVER goes on. It looks like some sort of loop. I wonder why cant get to...

Well.. my 5GHz band channels start at 36 and ends at 140 is the last one. I do not have much choices... or tweaking... :( 36 or... nothing then...

Ok. Changed... to as above. Sometimes one of the neighbors 5GHz appears to work and their router is set to 36. Will that interfere? Their signal is around 65+ dBm

Yes. Thank You. Melin has its own tool I use all time. My neighbors use only 2.4GHz with their crappy ISP routers. All 5GHz channels are free in my area. I live 10 miles from nearest airport.. Thanks for input.

Hi, My router keeps changing 5GHz channel on its own. From 100 to 36, sometimes to 40 at 80MHz. Sometimes after few hours, sometimes after few days. Why? Asus Merlin 384.19 All features working PERFECT so far... even 2.4GHz band. Thx Tomas

I did the above... when bought this router... trust me ;) Anyway.... Last night changed the channel to 1 and surprisingly its working ok for 20h now... And it looks channel 1 is/was a good choice: Now confused even more :) Thanks For All inputs!

I cant recall what sort of resets I have performed but I`m sure I was following one of the snbforum`s guide... maybe even Yours... Never had any issues with R7000 with SAME firmware and was not doing any "woodoo" to make it work.... So again, why do all "woodoo" stuff with asus? " Maybe some...

With all respect... Hard reset done before flashing latest Merlin... Im not in position starting over again as took mi HOURS to configure AMTM scripts, Transmission, VPN..... In the end it works. I just want to know why is buggy with recommended channels???

Connected devices stay connected for minutes maybe hours then get disconnected and device cant "see" 2.4GHz band... and in the end there is no 2.4GHz band.... This never happens when using channel 2-3-4-5-7-8-9-10 @20MHz - NEVER If that will be hardware fault none of them will work (I guess) :)

Hi Everyone, Just want to ask You guys. I have the famous 86U which only works ok when 2.4GHz is not set to channel 1 - 6 - 11. Every time set to channel mentioned = problems. Its strange as my neighborhood is not dense (very little interference - sometimes channel 1 or 6 is totally free)...