openvpn client

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. S

    386.11 Firmware - openvpn-client: --script-security message every 30 seconds

    Hi, Router = RT-AC86U I've upgraded its firmware from 386.10 to 386.11. Haven't changed anything on my side and now I'm getting this message every 30 seconds: ovpn-client1[18938]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Is there...
  2. S

    Solved Got answer by using different router.

    Got answer by using different router.
  3. A

    OpenVPN verify_x509_name char array size

    I got a question about the openvpn verify_x509_name char array size. First of all, this is not a big deal, as I can remove the verification or put it in the custom config. Just trying to understand if that's something intended or if can be improved. Is there a reason why only 32 (31 chars with...
  4. A

    Configuring VPNDirector to forward to Pi-hole DNS

    I committed the cardinal sin of updating my RT-AC68U's firmware (to 386.4) without backing up the configuration. (I do have a backup, but it's a few months old, and I'd rather just roll-forward with a fix than roll-back.) I only noticed and learned about the VPN Director after seeing my...
  5. A

    Solved OpenVPN Client: help debugging slow speed issue

    Recently i noticed that my vpn client was only getting about 10-15Mbps speed which is lower than what i had seen earlier 40-50Mbps. I confirmed with the VPN (Mullvad) provider that there were no issues on their end and then i did the following test. 1. Connect my mobile device directly to...
  6. K

    How do I configure my OpenVPN server on my Asus router to allow spacific use by different clients

    I have set up a OpenVPN server on my Asus RT-AX82U router (Firmware version 3.0.0.4.386_45375) and it has automatically generated a Client.opvn file. But how do I now alter this file to allow certain access to my net work? I have a couple of servers, which also contain web services, and some...
  7. G

    How to make this VPN Director working?

    A small retrospective: I have configured VPN client before to make my home network behinf NAT visible for me when remote. It worked like a charm. But now we have new firmware update - and it was broken. I've tried to configure VPN Director to allow a correct routing: It does not work though...
  8. adriansev

    OpenVPN client:: public ssh (or ping) not working

    Hi! It seems that all access to router public ip is lost after activating the openvpn client. (complete redirect) I'm not sure how the routing tables and firewall is set, but wouldn't be possible to keep INPUT access to the router public ip? Thanks a lot! Adrian
  9. JoGi

    Solved Openvpn server /client combination Yazfi issue

    Hi, I recently started using yazfi to route / link a guest network with vpnclient. this works great. :-) The only thing that strikes me now is that my existing Openvpn server is no longer working properly. If I make a VPN connection on my phone / PC, with vpn server, this works fine. but when...
  10. G

    VPN Client to allow access to home network

    Hi all. From some time my home provider uses NAT so I have no "white IP" anymore. However I am using Oracle Cloud VPS with OpenVPN-AS installed on it. "Using" means I connect all my portable devices to this VPN being in trip. So my idea is to connect the router to the same VPN but limiting...
  11. J

    Solved Asus RT-AC86U OpenVPN server behind ISP modem

    Hi there, it might be a newbie question... but that's how you learn right? I'm trying to set up a OpenVPN server, I just want to access to my RaspberryPi based Samba server from outside my local network. My setup: an ISP modem, connected by cable to my RT-AC86U (wan port), all devices and WiFi...
  12. G

    Accessing Pi4 Remotely when Tunneled

    Hi SNB friends, Firstly, thank you for your amazing threads. Now, I have successfully been able to access my LAN remotely via OpenVPN Server, tunneled through a OpenVPN Client. This is on a ASUS RT-AC86U running the latest version of ASUSMerlinWRT. This is 90% of the way there, for what I'm...
  13. C

    RT-AX88 & OpenVPN....AirPrint Issue...

    I'm being driven mad with AirPrint not working from an OpenVPN Client connecting to OpenVPN Server(s) running on my ASUS AX88, Merlin Build 384.19. What's working: - 2x OpenVPN Servers (1 UDP on subnet XXX.YYY.51.00, 1 TCP on XXX.YYY.52.0) - Server Config. includes split tunnelling (LAN & WAN...
  14. D

    Firewall "Network Services Filter" Is Bypassed When OpenVPN Client is Enabled 384.19

    I have an Amazon Fire tablet that by default appends 8.8.8.8 to any DNS settings. The 8.8.8.8 address is the first DNS server contacted by default, bypassing the router DNS setting provided by DHCP unless 8.8.8.8 is blocked. The only way I have found to block this is to 1. Add a network...
  15. C

    Access Devices on OpenVPN Client with OpenVPN Server and Client Configurations

    Hi, I have setup my AC87U on 384.13_6 with OpenVPN Server (WAN1/LAN1-172.168.1.0/24) and OpenVPN Client connecting to another WAN2/LAN2 (172.168.2.0/24). When connected inside LAN1, I am able to access devices on WAN1/LAN1 and WAN2/LAN2. When I am connecting from outside and vpn into LAN1, I...
  16. S

    Creating OpenVPN clients

    I think my problem is fairly simple but I can't for the life of me figure it out. My googlefoo is failing me as well. I'm newish to VPNs so I could have the language wrong, making it difficult to articulate me problem. Let me know if I need to clarify anything. I want to enable OpenVPN Server...
  17. D

    Setup more than one OpenVPN Client, ASUS Merlin

    Hello Anyone an idea how to setup more than one OpenVPN Client on the ASUS RT-AC87U with Merlin Firmware? If I go to "VPN" then to "OpenVPN Clients" I can set up "Client 1" "Client2" etc. But all the time I quit the connection, all the setting are gone to and I have to set it up again. Where...
  18. G

    VPN client fails to connect on latest 380.66.4

    Hi! I have tested this OpenVPN file on two routers: RT-AC66U and RT-AC68U. The file is imported well, but connection gives the following error: What is going on?
  19. S

    Routing local subnets over OpenVPN client connection

    Greetings, I apologize if this has been asked and answered. I have an AC87U running the latest Merlin firmware which occupies 192.168.1.0/24, connected to this I have an Ubiquity Edge Router X I have been playing with and it has an IP of 192.168.1.55 which is used as a gateway to another...
  20. S

    OpenVPN Client: Accept DNS Configuration

    Hi! My question is about the OpenVPN Client setting: Accept DNS Configuration: Strict Accept DNS Configuration: Exclusive What is the difference between these two values? How do they work compared to each other? There are a few webpages with explanations on this, but to me they seem...
Top