subnets

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. A

    Confused about subnets and vlans

    So I have a four port DIY router running pfsense and a Zyxel 24 port managed switch - neither are currently in use on my home network. I'm just connected to them via an old laptop to configure the web ui's. This is because my wife is very reliant on internet and access to our media server so I...
  2. H

    Securing iot devices with limitations and limited budget, well try maintain flexibility.

    Topic iot devices separated from Main devices within the home, but what qualifies as Main and what qualifies as iot and how to separate them when you don't have a switch that can tag packets? I also cannot run to land cables to the router or switches that I need to as each run through the house...
  3. A

    Reach device on guest network

    Hello. I have a device connected to Guest network #1 (192.168.101.0/24 subnet) which I’d like to reach from my PC (192.168.1.134). Is this possible? Maybe with some forwarding rules or with something else? Thanks!
  4. adri

    YazFi YazFi - Combining guest networks/subnets

    Hi, so this came up in my other thread, but I wanted to start a new one since it's a separate issue and I like separation of concerns :) . I want to make it so that, for one of my guest networks, the 2.4GHz segment (.14 subnet) can talk to the 5GHz segment (.15 subnet) and vice-versa, without...
  5. adri

    YazFi YazFi - Devices getting wrong IP address

    Hi, first time poster here. First, thank you to the creators of Merlin and YazFi - they work great for my needs. I have an RT-AX86U running Merlin 386.5_2 with YazFi 4.4.2, and I have 3 guest network SSIDs set up with YazFi, using 5 subnets (YazFi.conf attached). First there's spider_guest - for...
  6. perswade

    xr500 vpn service [router AS server] subnet woes *.*.2.* vs *.*.1.*

    To use LAN resources away from home I have setup the VPN service which sets the xr500 as the vpn server. My mobile is a client using openvpn software. I am able to connect away from home. my devices are set on the subnet 192.168.2.0 What server or client app settings need I change to access...
  7. Levente

    Enable samba from wan

    There is no vlan function in asusware routers, and because of it I set one of my ap back to router mode (to create another subnet). So now there is my main router (192.168.1.x), and my second router (192.168.2.x, which wan ip is 192.168.1.x). But there is a HDD on my 192.168.2.x (2nd router)...
  8. M

    Directing OpenVPN Server Clients to static addresses

    Little bit of a noob here, so bear with me and please forgive my poor use of terminology. Setting me straight is appreciated! Where I'm at so far: Currently have 4 server clients setup for connecting to server 1; client1-4 Previously, I was using a TAP connection and a static mac addresses...
  9. C

    traffic across vlans for ip cams and iot devices

    Hi Guys, I'm a regular visitor on this forum and user of Merlin for a few years now, i usually poke around untill i get it right but i'm stuck with this for so long (2 months) i decided to ask for your much needed help. Router: AC88U My goal, is to have 4 VLAN's as such; 1 - private -...
  10. S

    Networking Help Required between ISP Router and VPN Router

    Hi Guys, First time posting here after a lot of research online, hopefully someone here can help with the issue: I have an ISP router which is cabled physically to a Linksys router I am using with ExpressVPN firmware installed (OpenWRT). Everything connects fine but I am not able to ping...
Top