What's new
SNBForums

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

AC68U Antenna question

Kyo

New Around Here
Hi Folks

I have an AC68U, but the other day the unit dropped into the floor and then it raised a question for me, there is a way to check if each one of the 3 antennas are working as expected? there is a way to check the rssi or something like that per antenna?

Regards and cheers for such a great work Merlin!
 
There probably is but may require some specialized test equipment and that's a little over my head. I would probably use an app like WiFi Analyzer to see if your signal strength is the same as it was before the opps.
 
Hi Folks

I have an AC68U, but the other day the unit dropped into the floor and then it raised a question for me, there is a way to check if each one of the 3 antennas are working as expected? there is a way to check the rssi or something like that per antenna?

Regards and cheers for such a great work Merlin!
There really isn't anything inside the antennas that would likely be harmed by a fall. As long as the outside plastic shell is intact, and the threaded collar can still be tightened onto the router's antenna jack, you are OK.
 
Hi

Thanks for the info; one of the antennas (the one at the right side) is somewhat leaned, like the connector in the inside got bend or loose, anyways signal strength is similar to what I remember, but as there are 3 antennas maybe is the other 2 working fine... just being paranoic jeje.
 
Thanks for the info; one of the antennas (the one at the right side) is somewhat leaned
Remember that antennas are also adjustable -- they can both rotate around the axis of the connector, and lean in and out.
 
What about disconnecting them, leaving but one and check the signal? Then change then one...

Just a thought.
Maybe not a good idea.....the wireless power amps may not take too well to running without a load (the antenna)
 

Similar threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Staff online

Back
Top