Additional bridge not bridging - help please!

  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.

Hyacin

Occasional Visitor
Been pulling my hair out for two days trying to get this working, I give, please help.

I've got a REALLY simple bridge -

Code:
br1             8000.244bfe0a08c9       yes             bond0.12
                                                        wl0.1

I'm able to ping my DHCP server (via bond0.12) from my router -

Code:
[email protected]:/jffs# ping 10.250.99.3 -I br1
PING 10.250.99.3 (10.250.99.3): 56 data bytes
64 bytes from 10.250.99.3: seq=0 ttl=64 time=0.818 ms
64 bytes from 10.250.99.3: seq=1 ttl=64 time=0.698 ms
^C
--- 10.250.99.3 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.698/0.758/0.818 ms

[email protected]:/jffs#

I see traffic come *in* the wl0.1 interface -

Code:
23:51:35.011103 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from my:4h:0n:3f:00:b4 (oui Unknown), length 286
23:51:36.944442 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from my:4h:0n:3f:00:b4 (oui Unknown), length 286

but I do not see that traffic exit my bond0.12 interface. Anyone have any insight into what the hell is going on here?? Thanks!
 

Hyacin

Occasional Visitor
Finally found it ... ebtables ... didn't know that was a thing.

As I don't seem to be able to delete this thread, I guess I'll just leave all this here for posterity.
 

Similar threads

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top