What's new

Release ASUS GT-AX6000 Firmware version 3.0.0.6.102_34793 (2024/08/28)

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

bennor

Part of the Furniture
As mentioned by @Erwin in the Release ASUS GT-AX6000 Firmware version 3.0.0.6.102_34791 thread, there is new firmware out for the GT-AX6000.

ASUS GT-AX6000 Firmware version 3.0.0.6.102_34793
Version 3.0.0.6.102_34793 61.74 MB 2024/08/28
Fixed injection vulnerability.

 
What would "Fixed injection vulnerability" be exactly?

How bad it is depends on whether it requires being logged in or not and whether it’s exploitable from the WAN side. Since they pushed out this firmware solely to fix this one issue and less than a month after releasing the first firmware in over a year, I’m assuming it’s on the bad side.

It may be related to https://securityvulnerability.io/vulnerability/CVE-2024-42757
There was POC code released for that which would explain the rush.
 
I had a few odd issues after installing, rolled back after a day, reapplied today, no more issue
 
Last edited:
Working well here, no problems. Pretty simple home network configuration, though.
 
Mine is failing to install. I've tried using the update in the router's GUI, as well as downloading the file from Asus to my PC and uploading it to the router via wired PC.

Getting "Firmware upgrade unsuccessful. This may result from incorrect image or error transmission. Please check the version of firmware and try again."

I'm "stuck" on 3.0.0.6.102_34791-g92f56f9_385-g2830d
 
Last edited:
Mine is failing to install. I've tried using the update in the router's GUI, as well as downloading the file from Asus to my PC and uploading it to the router via wired PC.

Getting "Firmware upgrade unsuccessful. This may result from incorrect image or error transmission. Please check the version of firmware and try again."

I'm "stuck" on 3.0.0.6.102_34791-g92f56f9_385-g2830d
You can try a factory reset to fix the issue.
 
. . . just curious, but is fusion/vpn still the ui abomination it's always been? merlin-ware's version is one of the major reasons, i went rogue.
 
. . . just curious, but is fusion/vpn still the ui abomination it's always been? merlin-ware's version is one of the major reasons, i went rogue.
Merlin is not rogue! I only use Asus firmware for AiMesh nodes.
 
Merlin is not rogue! I only use Asus firmware for AiMesh nodes.
. . . and your POINT??!

are you ok? by that, i mean literate? i NEVER wrote that "merlin" was rogue! perhaps you need help with your ENGLISH. i described my own act (rogue), k. now i certainly have some thoughts about you, but this is a family board.
 
This is the release notes for the new firmware.

Firmware version 3.0.0.6_102_34797-g974b24d_404-ge7bfb
- Release Note -

Bug Fixes and Enhancements:
  1. Optimized memory management mechanisms, improving system efficiency and stability.
  2. Strengthened input validation and data processing workflows, further protecting your information security.
  3. Improved web rendering engine, enhancing browsing experience and security.
  4. Enhanced security of system command processing to guard against potential malicious operations.
  5. Perfected JavaScript-related security mechanisms, offering a more secure web interaction environment.
 
Last edited:

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top