What's new

Release ASUS RT-AX86U Pro Firmware version 3.0.0.6_102_34313 - 2024/05/28

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

OzarkEdge

Part of the Furniture
Firmware version 3.0.0.6_102_34313-g90fb2f8_385-g2830d
- Release Note -

Bug Fixes and Enhancements:
- Fixed IPV6 connection issue.

Available from router webUI... upgraded my AiMesh without reconfiguration.

Available from non-US website:

Available from US website eventually: https://www.asus.com/us/networking-...6u-pro/helpdesk_bios/?model2Name=RT-AX86U-Pro

OE
 
Last edited:
Need update if channel selection from auto on 2.4 and/or 5 GHz stick or not

Also need to know if LEDs turned off actually stay off when changes are made or if 5 ghz light turns back on
 
Need update if channel selection from auto on 2.4 and/or 5 GHz stick or not
What I found was that it is a cosmetic issue. The setting does change but the page is not updating. If I refresh (forced) the page I see the correct value. I might have to refresh the page even after after logging in to the router.
 
What I found was that it is a cosmetic issue. The setting does change but the page is not updating. If I refresh (forced) the page I see the correct value. I might have to refresh the page even after after logging in to the router.

Either way firmware bug.
 
Need update if channel selection from auto on 2.4 and/or 5 GHz stick or not

Also need to know if LEDs turned off actually stay off when changes are made or if 5 ghz light turns back on
Never had a problem with manual channel selection on either band.

Edit: Also no problem turning the router LED's off and on using the iOS app or the Android app.
 
Last edited:
Never had a problem with manual channel selection on either band.

Edit: Also no problem turning the router LED's off and on using the iOS app or the Android app.
Thanks - LED toggles off and on with the app but making a change in the web GUI was doing a weird glitch where the 5 Ghz only LED would pop back on and the rest remained off
 
Now up for download on Asus:
https://www.asus.com/networking-iot...6u-pro/helpdesk_bios/?model2Name=RT-AX86U-Pro
ASUS RT-AX86U Pro Firmware version 3.0.0.6.102_34313
Version 3.0.0.6.102_34313
58.16 MB
2024/05/28
Fixed IPV6 connection issue.

Please unzip the firmware file, and then verify the checksum.
SHA256: 1b7025b992efef0a4b370828e8622a6c8c7ddd5a11ed8fe9d5f7f6c3b4d00c91
Direct download link: https://dlcdnets.asus.com/pub/ASUS/...AX86U_PRO_300610234313.zip?model=RT-AX86U Pro
US website (as of this post) doesn't have the 3.0.0.6.102_34313 firmware yet.
https://www.asus.com/us/networking-...6u-pro/helpdesk_bios/?model2Name=RT-AX86U-Pro
 
Thanks - LED toggles off and on with the app but making a change in the web GUI was doing a weird glitch where the 5 Ghz only LED would pop back on and the rest remained off
Ah, I forgot that the LED's can be switched off in the AiMesh management area, So, I switched them off there and all went off and stayed off until I turned them back on. Maybe it is your router that has a glitch and not the firmware?
 
Ah, I forgot that the LED's can be switched off in the AiMesh management area, So, I switched them off there and all went off and stayed off until I turned them back on. Maybe it is your router that has a glitch and not the firmware?
No because you didn't read what I said. Yes the LEDs turn off but if you make a change say channel manual selection for a band the 5 GHz LED alone would pop back up while the rest stayed off. It's not a problem of turning them off via hardware button or web GUI but there is a software glitch turning that one LED back on; this problem doesn't exist in RMerlin's latest firmware for example so it's not my router
 
No because you didn't read what I said. Yes the LEDs turn off but if you make a change say channel manual selection for a band the 5 GHz LED alone would pop back up while the rest stayed off. It's not a problem of turning them off via hardware button or web GUI but there is a software glitch turning that one LED back on; this problem doesn't exist in RMerlin's latest firmware for example so it's not my router
Nope. I turned the LED's off and switched between just about every 5 GHz channel and bandwidth choice and the LED's stayed off. All the LED's stayed off.

Maybe you did not do the Hard Factory Reset correctly. Best to do a reset with initialize. Or, your router has a glitch.
 
The WIFI MAC Filter is not working on this version to block connection attempts. There is a TUYA device somewhere close that is trying to connect to my WIFI as several others have reported on other threads. Setting the Wireless MAC filter to Deny for both bands fails to block the connection attempts. Has been reported to Asus.

Going to Merlin 388.7 I discovered the Guest WIFI has a Wireless MAC filter setting. So, I reflashed the 102.34313 and discovered the Guest Network Pro does not have a wireless MAC filter. That is where the connection attempts were coming from in the log. Back to 388.7 until the Asus 5 firmware gets a MAC filter for the guest networks.

Edit: Ah Ha! Finally got this in the right place!
 

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top