ASX88U General Log spam, protocol is buggy

  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.

sir3lit

Occasional Visitor
Just upgraded to 386.1_2 from 384.19_beta2 and reviewing the General Log in the system logs ~4 seconds this gets posted

Code:
Mar  8 06:05:46 kernel: protocol 0800 is buggy, dev eth0
Mar  8 06:05:47 kernel: protocol 0800 is buggy, dev eth0
Mar  8 06:05:47 kernel: protocol 0800 is buggy, dev br0
Mar  8 06:05:47 kernel: protocol 86dd is buggy, dev eth0
Mar  8 06:05:51 kernel: protocol 0800 is buggy, dev eth0
Mar  8 06:05:51 kernel: protocol 0800 is buggy, dev br0
Mar  8 06:05:51 kernel: protocol 0800 is buggy, dev br0
Mar  8 06:05:52 kernel: protocol 0800 is buggy, dev br0
Mar  8 06:05:52 kernel: protocol 0800 is buggy, dev eth0
Mar  8 06:05:52 kernel: protocol 0800 is buggy, dev br0
Mar  8 06:05:53 kernel: protocol 0800 is buggy, dev br0
Mar  8 06:05:53 kernel: protocol 0800 is buggy, dev eth0
Mar  8 06:05:53 kernel: protocol 0800 is buggy, dev br0
Mar  8 06:05:53 kernel: protocol 0800 is buggy, dev eth0
Mar  8 06:05:56 kernel: protocol 0800 is buggy, dev br0
Mar  8 06:05:57 kernel: protocol 86dd is buggy, dev br0
Mar  8 06:05:57 kernel: protocol 0000 is buggy, dev eth0
Mar  8 06:05:57 kernel: protocol 0800 is buggy, dev br0
Mar  8 06:05:57 kernel: protocol 0800 is buggy, dev br0
Mar  8 06:05:57 kernel: protocol 0800 is buggy, dev eth0
Mar  8 06:05:57 kernel: protocol 86dd is buggy, dev eth0
Mar  8 06:05:57 kernel: protocol 86dd is buggy, dev br0
Mar  8 06:05:57 kernel: protocol 0000 is buggy, dev eth0
Mar  8 06:05:58 kernel: protocol 0800 is buggy, dev br0

Not running a VPN, AiMesh, QoS, AiCloud, or anything special. No guest networks are enabled, just 2.4 and 5GH
 

joe scian

Very Senior Member
try ENABLING Guest Network 2 -( Not 1) even though you dont require it and see if messages dissapear
 

joe scian

Very Senior Member
Well i had the same issue and that fixed it for me
 

sir3lit

Occasional Visitor
That's very weird. Abother odd thing is when I got up my wifi was literally crapling itself. As seen below.
Screenshot_20210308-133132_Speedtest.jpg
 

joe scian

Very Senior Member
Well i had the same issue and that fixed it for me
Whats your ISP BW Speed - That does look like crap. Might be time for a WPS Reset or a factory reset and manually configure everything from scratch - especially coming from 384.19 to 386.1_2 and especially so if you have not done so as yet.
 

sir3lit

Occasional Visitor
I have att fiber. So 1000mbps. On wifi I can normally pull 600 to 750 down and 800 upload. Wired I can normally pull 950 both directions but after this update unlucky to see over 700, wired and 250ish on 5G.

It will take me a minute to do a factory reset. Have so many things with static local addresses
 

Attachments

  • Screenshot_20210309-023239_Speedtest.jpg
    Screenshot_20210309-023239_Speedtest.jpg
    21 KB · Views: 8

joe scian

Very Senior Member
I have att fiber. So 1000mbps. On wifi I can normally pull 600 to 750 down and 800 upload. Wired I can normally pull 950 both directions but after this update unlucky to see over 700, wired and 250ish on 5G.

It will take me a minute to do a factory reset. Have so many things with static local addresses

OK so you may want to take advantage of YazDHCP - use j7 in amtm
 

sir3lit

Occasional Visitor
A little update, the protocol buggy logs have returned and guest network 2 ( 2.4 ) is enabled.

Anyone else have any ideas? I have yet to do a reset, that is on my agenda tonight.


Also, it appears the issue I was experiencing with the super slow speeds was actually on the 5GHz band, just happened again and wasn't able to do a speed test, switched to 2.4Ghz was able to pull ~70 down and ~40 up

Code:
Mar 10 13:47:35 kernel: protocol 0800 is buggy, dev br0
Mar 10 13:47:40 kernel: protocol 0800 is buggy, dev eth0
Mar 10 13:47:40 kernel: protocol 0800 is buggy, dev eth0
Mar 10 13:47:40 kernel: protocol 0800 is buggy, dev eth0
Mar 10 13:47:40 kernel: protocol 0800 is buggy, dev eth0
Mar 10 13:47:40 kernel: protocol 0800 is buggy, dev eth0
Mar 10 13:47:40 kernel: protocol 0800 is buggy, dev br0
Mar 10 13:47:40 kernel: protocol 0800 is buggy, dev eth0
Mar 10 13:47:40 kernel: protocol 0800 is buggy, dev eth0
Mar 10 13:47:40 kernel: protocol 0000 is buggy, dev eth0
Mar 10 13:47:40 kernel: protocol 86dd is buggy, dev br0

1615402121719.png
 

sir3lit

Occasional Visitor
Updated to 386.2_beta1 and the wifi speeds have been fixed from the little amount of testing I've done.

Still getting

Code:
Mar 11 00:55:14 kernel: protocol 86dd is buggy, dev br0
Mar 11 00:55:19 kernel: protocol 0800 is buggy, dev eth0
Mar 11 00:55:19 kernel: protocol 0800 is buggy, dev br0
Mar 11 00:55:19 kernel: protocol 0000 is buggy, dev eth0

repeating itself in the logs.
 

Similar threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top