AX56U ftp server issue

  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.

omega

New Around Here
Hello! I have an ax56u with and with latest update - 3.0.0.4.386.42808 - i'm experiencing an issue with ftp server. I can't login on browser and my foscam ip camera cannot upload videos on my attached hdd. With 3.0.0.4.384.10290 i have no problem with ftp server. Is anyone with the same problem around here? I don't know what to do.
 

Adooni

Senior Member
As a lot of people is doing it I would suggest to move to https://www.asuswrt-merlin.net/
RMerlin community is very strong on this forum and if challenge will be present with this firmware you will get very good support.
RMerlin is a AsusWRT on steroids :) and you will have the same and better functionality. You can put it via AsusWRT gui but clear nvram.
 

ColinTaylor

Part of the Furniture
Did you factory reset and manually reconfigure your router after installing the 386.x firmware?
 

ColinTaylor

Part of the Furniture
When you say you "can't login on browser" do you mean logging in with HTTP or FTP?
 

omega

New Around Here
i mean i can't login on ftp server adress ftp://192,168.1.1 becase it's showing the login dialog but that's all, it can't login ftp server and my ip camera cannot upload files for the same reason. It's not an user problem because with 384 i have no problems
 

ColinTaylor

Part of the Furniture
Can you post a screen shot of the USB Application > Servers Center > FTP Share page.
 

omega

New Around Here
Updated again to 386. No errors in change log, same bug.
 

Attachments

  • sketch-1624888199168.png
    sketch-1624888199168.png
    175.5 KB · Views: 34
  • sketch-1624888230074.png
    sketch-1624888230074.png
    166.7 KB · Views: 35

L&LD

Part of the Furniture
@omega, can you clarify what a 'fresh install' is for you?
 

ColinTaylor

Part of the Furniture
Your screenshot is too small.

Turn off "Enable WAN access" and "Enable TLS support" and try again.
 

omega

New Around Here
@omega, can you clarify what a 'fresh install' is for you?
I did both methods, resetting from the physical button and from webui too without using any backup.
Your screenshot is too small.

Turn off "Enable WAN access" and "Enable TLS support" and try again.
Wan is enabled, also TLS support is enabled. Without wan acces enabled doesn't make any difference, neither for TLS. I did the same settings like on 384.
 

ColinTaylor

Part of the Furniture
i mean i can't login on ftp server adress ftp://192,168.1.1 becase it's showing the login dialog but that's all ...
That's because you have TLS enabled and are trying to connect with a non-TLS session ("e.g. ftp://"). With TLS enabled you must use a client configured for FTPS, not FTP.
 

omega

New Around Here
I disabled TLS and it started working. I have no idea why because I had enabled on 384. I want to thank all of you for helping me. Have a great day!
 

L&LD

Part of the Furniture
Glad you solved the problem.

Here is the recommended method.

 

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top