What's new

Release AX86U Pro Firmware version 3.0.0.6_102_34336 (2024/11/12)

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

bbunge

Part of the Furniture
Firmware version 3.0.0.6_102_34336-gc04af06_403-gd851b

As usual for these days available via router GUI/app upgrade.

- Release Note -

Bug Fixes and Enhancements:
- Resolved UI display issue when setting a fixed channel.
 
Last edited:
Download also available on the Asus global support page for the RT-AX86U Pro:
https://www.asus.com/networking-iot...86u-pro/helpdesk_bios?model2Name=RT-AX86U-Pro

ASUS RT-AX86U Pro Firmware version3.0.0.6.102_34336
Version 3.0.0.6.102_34336
58.23 MB
2024/11/12
Please unzip the firmware file, and then verify the checksum.
SHA256: 9fa8f6fb0d85757ce67dc860411fb517d6b1aa1b2c5bba032d0acac03a8ace83

Bug Fixes and Enhancements:
- Resolved UI display issue when setting a fixed channel.

Download: https://dlcdnets.asus.com/pub/ASUS/wireless/RT-AX86U Pro/FW_RT_AX86U_PRO_300610234336.zip?model=RT-AX86U Pro
 
Last edited:
The last week I’m running 3.0.0.6_102_/.. 34336 my. I’ve created vlans for Wi-Fi and one with port isolation. Works well. I’m connected to the 802.1Q with a number I got from my ISP and works flawless for internet and IPTV. I did a dive into the priority levels for 802.1P (QOS) and standard it’s p0. I also tried 3/4 and 7 but I couldn’t notice any difference in video streaming or latency etc. My ISP is using unicast. Does it make any sense to set this priority number or leave it to zero, best effort? Just curious..
 
Got one Pro router home to play with Asuswrt 5.0 today. Question about the VLANed networks - it allows one VLAN network per SSID only? So if I want to have Main Network, Guest Network, Kids Network, IoT Network, etc. - 4x different SSIDs? I don't see an option for private keys. @bbunge @OzarkEdge
 
Got one Pro router home to play with Asuswrt 5.0 today. Question about the VLANed networks - it allows one VLAN network per SSID only? So if I want to have Main Network, Guest Network, Kids Network, IoT Network, etc. - 4x different SSIDs? I don't see an option for private keys. @bbunge @OzarkEdge
Right - No option for private keys.

Nothing says you can't use the same SSID for more than one VLAN/GN. Or disable the radio for the GN and assign the VLAN to a LAN port.
 
It has a bug?

in configuring openvpn, the ip range is not overlapping still it shows an error.
Go back to the default LAN subnet of 192.168.50.0/24 and you will not have a conflict. And double check your use of a /30 subnet.

Can not understand why you would use a Class A address on a SOHO router. 253 IP addresses should be enough for 99.9% of home users. If you need more addresses there are creative things you can do.
 
Nothing says you can't use the same SSID for more than one VLAN/GN.

In this case the router has no way to determine which clients belongs to GN1 and which ones to GN2. Interesting backwards logic, by the way. You start with a radio and build networks on top. On most VLAN capable routers you start with a network and attach a radio to it. VPN Fusion follows the same logic - you start with all clients in and have the option to exclude some. Common logic is you start with interface and add clients to it. Not sure why Asus did it this way. More user friendly perhaps when you first have this available? Probably. I'll play with it some more tomorrow.
 
Got one Pro router home to play with Asuswrt 5.0 today.

'll play with it some more tomorrow.

Let us know if you have any success with non Asuswrt 5.0 Nodes getting all the Guest Wifi/VLANs, ta :).

[EDIT] Edited to clarify not just GN1 but all GNs (eg IoT VLAN).
 
Last edited:
GN works for me with a AC86u. I did setup the mesh node with a “standard” 2.4ghz and 5ghz ssid. The wifi devices (IOT 2.4Ghz) to the mesh node belongs to the GN with vpn, lower than 70db. The “standard “ ssid’s 2.4 is hidden on the AX86Pro. Only one standard ssid for the 5ghz with no GN. In the end I have only 2 ssid’s visible but I did setup the mesh with the now hidden 2.4ghz ssid.
 

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top