Carlos Irigaray
Occasional Visitor
I am trying to move the configuration I had on my AC5300 to an AX88U. So far everything works except the detection of the UPS.
Both routers are running the same version (384.14) and both have the usb modules compiled and inserted in the kernel prior to connecting the UPS.
If I type dmesg this is what I get on the AC5300 (where everything works):
On the AX88U (where the UPS is not recognized) this is what I get:
What am I missing?
Thanks!
Both routers are running the same version (384.14) and both have the usb modules compiled and inserted in the kernel prior to connecting the UPS.
If I type dmesg this is what I get on the AC5300 (where everything works):
Code:
usb 2-2: new full speed USB device using ohci_hcd and address 3
usbcore: registered new interface driver hiddev
generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS ES 600M1 FW:928.a8 .D U] on usb-0000:00:0b.0-2/input0
On the AX88U (where the UPS is not recognized) this is what I get:
Code:
usb 4-2: new full-speed USB device number 2 using ohci-platform
What am I missing?
Thanks!