AX92U drops connection and log error

  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.

meik19081999

New Around Here
Hello snbforum,

I set up 3 AX92U in a mesh configuration, but either the connection is unstable (no communication via teams-call possible) or it completly drops the wifi.

So far I've updated the firmware, factory resetted everything and set it up from scratch. Also I seperated the 2,4ghz 5-1ghz and 5-2ghz network with three different SSID's. Smart connect is also disabled.

The weird thing is my Log with the same message repeated all the time:

Sep 21 16:29:43 acsd: acs_check_cap(334): eth7 Error -19 in getting cap
Sep 21 16:29:43 acsd: acs_check_cap(334): eth7 Error -19 in getting cap
Sep 21 16:29:43 acsd: eth7: Selecting 2g band ACS policy
Sep 21 16:29:43 acsd: acs_get_country(376): get country on eth7 returned -19.
Sep 21 16:29:43 acsd: acs_start(408): eth7: Failed to get country info
Sep 21 16:29:43 acsd: acs_get_rs_info(226): failed to get obss_coexret code: -19
Sep 21 16:29:43 acsd: acsd_chanim_init(118): eth7: failed to set chanim_sample_period
Sep 21 16:29:43 acsd: acsd_chanim_init(127): eth7: failed to set noise metric
Sep 21 16:29:43 acsd: acs_start(432): chanim init failed ret code: -19
Sep 21 16:29:46 acsd: acs_check_cap(334): eth7 Error -19 in getting cap
Sep 21 16:29:46 acsd: acs_check_cap(334): eth7 Error -19 in getting cap
Sep 21 16:29:46 acsd: eth7: Selecting 2g band ACS policy
Sep 21 16:29:46 acsd: acs_get_country(376): get country on eth7 returned -19.
Sep 21 16:29:46 acsd: acs_start(408): eth7: Failed to get country info
Sep 21 16:29:46 acsd: acs_get_rs_info(226): failed to get obss_coexret code: -19
Sep 21 16:29:46 acsd: acsd_chanim_init(118): eth7: failed to set chanim_sample_period
Sep 21 16:29:46 acsd: acsd_chanim_init(127): eth7: failed to set noise metric
Sep 21 16:29:46 acsd: acs_start(432): chanim init failed ret code: -19
Sep 21 16:29:49 acsd: acs_check_cap(334): eth7 Error -19 in getting cap
Sep 21 16:29:49 acsd: acs_check_cap(334): eth7 Error -19 in getting cap
Sep 21 16:29:49 acsd: eth7: Selecting 2g band ACS policy
Sep 21 16:29:49 acsd: acs_get_country(376): get country on eth7 returned -19.
Sep 21 16:29:49 acsd: acs_start(408): eth7: Failed to get country info
Sep 21 16:29:49 acsd: acs_get_rs_info(226): failed to get obss_coexret code: -19
Sep 21 16:29:49 acsd: acsd_chanim_init(118): eth7: failed to set chanim_sample_period
Sep 21 16:29:49 acsd: acsd_chanim_init(127): eth7: failed to set noise metric
Sep 21 16:29:49 acsd: acs_start(432): chanim init failed ret code: -19


Sadly I could not find anything in the internet about the log, so I hope someone here can help me understand it :)

Thank you very much for your help!
 

Techtype

Occasional Visitor
Hello snbforum,

I set up 3 AX92U in a mesh configuration, but either the connection is unstable (no communication via teams-call possible) or it completly drops the wifi.

So far I've updated the firmware, factory resetted everything and set it up from scratch. Also I seperated the 2,4ghz 5-1ghz and 5-2ghz network with three different SSID's. Smart connect is also disabled.

The weird thing is my Log with the same message repeated all the time:

Sep 21 16:29:43 acsd: acs_check_cap(334): eth7 Error -19 in getting cap
Sep 21 16:29:43 acsd: acs_check_cap(334): eth7 Error -19 in getting cap
Sep 21 16:29:43 acsd: eth7: Selecting 2g band ACS policy
Sep 21 16:29:43 acsd: acs_get_country(376): get country on eth7 returned -19.
Sep 21 16:29:43 acsd: acs_start(408): eth7: Failed to get country info
Sep 21 16:29:43 acsd: acs_get_rs_info(226): failed to get obss_coexret code: -19
Sep 21 16:29:43 acsd: acsd_chanim_init(118): eth7: failed to set chanim_sample_period
Sep 21 16:29:43 acsd: acsd_chanim_init(127): eth7: failed to set noise metric
Sep 21 16:29:43 acsd: acs_start(432): chanim init failed ret code: -19
Sep 21 16:29:46 acsd: acs_check_cap(334): eth7 Error -19 in getting cap
Sep 21 16:29:46 acsd: acs_check_cap(334): eth7 Error -19 in getting cap
Sep 21 16:29:46 acsd: eth7: Selecting 2g band ACS policy
Sep 21 16:29:46 acsd: acs_get_country(376): get country on eth7 returned -19.
Sep 21 16:29:46 acsd: acs_start(408): eth7: Failed to get country info
Sep 21 16:29:46 acsd: acs_get_rs_info(226): failed to get obss_coexret code: -19
Sep 21 16:29:46 acsd: acsd_chanim_init(118): eth7: failed to set chanim_sample_period
Sep 21 16:29:46 acsd: acsd_chanim_init(127): eth7: failed to set noise metric
Sep 21 16:29:46 acsd: acs_start(432): chanim init failed ret code: -19
Sep 21 16:29:49 acsd: acs_check_cap(334): eth7 Error -19 in getting cap
Sep 21 16:29:49 acsd: acs_check_cap(334): eth7 Error -19 in getting cap
Sep 21 16:29:49 acsd: eth7: Selecting 2g band ACS policy
Sep 21 16:29:49 acsd: acs_get_country(376): get country on eth7 returned -19.
Sep 21 16:29:49 acsd: acs_start(408): eth7: Failed to get country info
Sep 21 16:29:49 acsd: acs_get_rs_info(226): failed to get obss_coexret code: -19
Sep 21 16:29:49 acsd: acsd_chanim_init(118): eth7: failed to set chanim_sample_period
Sep 21 16:29:49 acsd: acsd_chanim_init(127): eth7: failed to set noise metric
Sep 21 16:29:49 acsd: acs_start(432): chanim init failed ret code: -19


Sadly I could not find anything in the internet about the log, so I hope someone here can help me understand it :)

Thank you very much for your help!
https://www.snbforums.com/threads/ax88u-overflowing-error-log.67203/
 

meik19081999

New Around Here
Thank you very much for your reply!

I tried to unplug the router for 5 seconds a couple of times, but the error remains...

Is the main unit (router) or maybe one of the nodes the problem?
 

Similar threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top