connect router with different network address

[rifti purnama]

R1 : host address 192.168.1.0 > ASUS RTN66U
Rz : host address 192.168.2.0 > ASUS RT-AC55UHP
its posible connect pc from different both?

my topology :
ISP >> eth*Wan--(R1)--eth*4 >> eth*Wan--(Rz)
*eth, i mean Ethernet

from host X.X.2.0, i can connect pc from host X.X.1.0
but not otherwise pc from host X.X.1.0 to pc at host X.X.2.0,

i'm add to my routing table at R1
Destination Gateway Genmask Flags Metric Ref Use Type Iface
192.168.2.0 192.168.1.3 255.255.255.0 UG 1 0 0 LAN br0

are my config wrong?
or i missing something?

 

[Samir]

You have a double nat, that's why you can't connect.

What is your goal with these two?

 

[bernard038]

Hi Rifti,

If you don't have a specific reason to split your network in two subnets, i would put Rz (the RT-AC55UHP) in access point mode, disabling all router functions on it.

Cheers, b.