CPU usage

  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.

MakeItEasy

Occasional Visitor
Hi guys,

There is almost no traffic but i never seen as much CPU since I have the router (the two CPU were always very low, +- 2/3% usage) so what is going on ?

Note I activated Ai Protected from 3 days but that seemed to change nothing for the CPU, at least in the beginning.

1603738668580.png
1603739004883.png
 

Attachments

bbunge

Very Senior Member
Hi guys,

There is almost no traffic but i never seen as much CPU since I have the router (the two CPU were always very low, +- 2/3% usage) so what is going on ?

Note I activated Ai Protected from 3 days but that seemed to change nothing for the CPU, at least in the beginning.

View attachment 27185View attachment 27187
My guess is you have a USB drive attached. Likely the media server doing a sync or Samba is reading the drive.
And, you should upgrade to the new firmware.
 

MakeItEasy

Occasional Visitor
No, I don't have anything connected through USB.
Besides you remind me to disable USB. Still haven't found where this option is hidden in the UI.
 

ATLga

Regular Contributor
Hi guys,

There is almost no traffic but i never seen as much CPU since I have the router (the two CPU were always very low, +- 2/3% usage) so what is going on ?

Note I activated Ai Protected from 3 days but that seemed to change nothing for the CPU, at least in the beginning.

View attachment 27185View attachment 27187
Looks normal for trend micro turned on. Typically 20% bump over what it may have been prior to activating it.
 

bitsbytes

Regular Contributor
Hi guys,

There is almost no traffic but i never seen as much CPU since I have the router (the two CPU were always very low, +- 2/3% usage) so what is going on ?

Note I activated Ai Protected from 3 days but that seemed to change nothing for the CPU, at least in the beginning.

View attachment 27185View attachment 27187
when was the last time you did a factory reset? this happens to me after a couple of dirty updates and it goes away with a factory reset.
 

MakeItEasy

Occasional Visitor
Seems like to a lot more than +20% !

I have the router since one month and I only do one factory reset/firmware upgrade.

1603744582131.png
 

MakeItEasy

Occasional Visitor
The three ones.

Nothing in the logs.

The client list (although I know it is not very reliable) shows me devices that are disconnected.

I think I will do a reboot (18 days on).
 

OzarkEdge

Part of the Furniture
It's not AiProtection\Network Protection.

Did you reset after the firmware upgrade?

OE
 

MakeItEasy

Occasional Visitor
After a reboot and more than 30 minutes, still back to normal (between 0 and ~5 % on each core).

Strange...
 

Similar threads

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top