Voxel Custom firmware build for R7800 v. 1.0.2.88SF

  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.

Voxel

Part of the Furniture
Continuation of

. . .
https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-86sf.73362/
https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-87sf.74003/

New version of my custom firmware build: 1.0.2.88SF.

Changes (vs 1.0.2.87SF):

1. Toolchain: Go is upgraded 1.16.6->1.17.
2. OpenSSL v. 1.1.1 package is upgraded 1.1.1k->1.1.1l (fixing CVE-2021-3711, CVE-2021-3712).
Base Scores (SUSE): 9.8 and 5.3.​
3. DNSCrypt Proxy v.2 is upgraded 2.0.45->2.1.0.
re: what to change in your config​
4. Fix typo in '/sbin/cmdupnp' (thanks to kamoj ).
5. ipset package is upgraded 7.14->7.15.
6. procps-ng package is upgraded 3.3.16->3.3.17.
7. pcre package is upgraded 8.44->8.45.
8. util-linux package is upgraded 2.37.1->2.37.2.
9. unbound package (used in stubby) is upgraded 1.13.1->1.13.2.
10. e2fsprogs package is upgraded 1.46.3->1.46.4.
11. libubox package is upgraded 2021-05-16->2021-08-19.
12. OpenVPN client init script: fix bash style comparison '==' -> '='.
13. Host tools (e2fsprogs): is upgraded to 1.46.4.

The link is:

https://www.voxel-firmware.com (thanks to vladlenas for his help with hosting).

Voxel.
 

Sizzlechest

Regular Contributor
Upgraded without a hitch. However, I had a hard time downloading it. Both Firefox and Edge had issues.

VOXEL.png
 

Thang

Occasional Visitor
I have a problem with blocking each device in the access control. Hope everyone can share how to fix this problem. Tks !
 

3rdOne

Occasional Visitor
Continuation of

. . .
https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-86sf.73362/
https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-87sf.74003/

New version of my custom firmware build: 1.0.2.88SF.

Changes (vs 1.0.2.87SF):

1. Toolchain: Go is upgraded 1.16.6->1.17.
2. OpenSSL v. 1.1.1 package is upgraded 1.1.1k->1.1.1l (fixing CVE-2021-3711, CVE-2021-3712).
Base Scores (SUSE): 9.8 and 5.3.​
3. DNSCrypt Proxy v.2 is upgraded 2.0.45->2.1.0.
re: what to change in your config​
4. Fix typo in '/sbin/cmdupnp' (thanks to kamoj ).
5. ipset package is upgraded 7.14->7.15.
6. procps-ng package is upgraded 3.3.16->3.3.17.
7. pcre package is upgraded 8.44->8.45.
8. util-linux package is upgraded 2.37.1->2.37.2.
9. unbound package (used in stubby) is upgraded 1.13.1->1.13.2.
10. e2fsprogs package is upgraded 1.46.3->1.46.4.
11. libubox package is upgraded 2021-05-16->2021-08-19.
12. OpenVPN client init script: fix bash style comparison '==' -> '='.
13. Host tools (e2fsprogs): is upgraded to 1.46.4.

The link is:

https://www.voxel-firmware.com (thanks to vladlenas for his help with hosting).

Voxel.
Just updated to 1.0.2.88SF no issues - Thank you very much Voxel.
 

bartj12

Occasional Visitor
I have a problem with blocking each device in the access control. Hope everyone can share how to fix this problem. Tks !
I'm not at home so can't see the exact screens or wording.
Using the "grand access" of "block" buttons didn't work for me, but adding Mac addresses to the block or white list did the trick.

Hopefully it works also for you.
 

crisarn

New Around Here
How can I check to be sure the new FW update installed correctly or not. When I upload the image file I get a black page showing "Please wait a moment" then the page reverts back to the FW update screen after about 20 seconds. Usually I expect the router to reboot after a FW update but this isn't happening.

1630611615223.png
 

microchip

Very Senior Member
How can I check to be sure the new FW update installed correctly or not. When I upload the image file I get a black page showing "Please wait a moment" then the page reverts back to the FW update screen after about 20 seconds. Usually I expect the router to reboot after a FW update but this isn't happening.

View attachment 36091

You're using DumaOS, which isn't supported. Only stock firmware is suppported on R7800/R8900/R9000 and Orbi
 

crisarn

New Around Here
You're using DumaOS, which isn't supported. Only stock firmware is suppported on R7800/R8900/R9000 and Orbi
Correct, I understand I am running a custom FW that is not supported.

Could you comment on the FW update process with Voxel's FW? I am coming from a older Voxel release, should I expect a reboot, is there a way to verify the FW updated after the flash?
 
Last edited:

elceedub

New Around Here
Correct, I understand I am running a custom FW that is not supported.

Could you comment on the FW update process with Voxel's FW? I am coming from a older Voxel release, should I expect a reboot, is there a way to verify the FW updated after the flash?
I believe he's saying you need to flash back to stock FW first, then flash Voxel.
 

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top