Ethernet Port Labels Change When Dual Wan enabled

  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.

drkCrix

New Around Here
Good evening,

Just started using Merlin on my RT-AX86U and I noticed something odd. When I don't have Dual Wan enabled, the Ethernet Port Status is correct, Wan - 1 Gbps, Lan 1 - 1 Gbps, Lan 2 - 1Gbps Lan 3 and 4 are empty and Lan 5 - 2.5Gbps

When I enable Dual wan the 2.5Gbps port moves to Lan 4, Lan 5 show 100 Mbps and Lan 2 shows disconnected.

I have tried 386.2_6 and 386.3_Beta3 and both show this behavior. If I flash back to the stock Asus firmware it shows as intended.

Is there anything I need to do in order to fix this issue?

Cheers,

Chris
 

RMerlin

Asuswrt-Merlin dev
Is there anything I need to do in order to fix this issue?
I'm a few months behind them in terms of code, so if it's something they fixed over the past few months, we will just have to wait for the fix to trickle down my way.
 

Xrsenal

Regular Contributor
Good evening,

Just started using Merlin on my RT-AX86U and I noticed something odd. When I don't have Dual Wan enabled, the Ethernet Port Status is correct, Wan - 1 Gbps, Lan 1 - 1 Gbps, Lan 2 - 1Gbps Lan 3 and 4 are empty and Lan 5 - 2.5Gbps

When I enable Dual wan the 2.5Gbps port moves to Lan 4, Lan 5 show 100 Mbps and Lan 2 shows disconnected.

I have tried 386.2_6 and 386.3_Beta3 and both show this behavior. If I flash back to the stock Asus firmware it shows as intended.

Is there anything I need to do in order to fix this issue?

Cheers,

Chris
PORT 1 is the gaming port fyi
 

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top