Firmware Bug Between Access Points - Client List Categories?

  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.

ds5686920

Occasional Visitor
I have a RT-ACRH13 AP in Loft (3rd floor connected to Firewalla Gold which is the DHCP server). To extend this AP I added a RT-AC1200 V2 AP via MoCA in Living Room on first floor. This network segment is for IoT like light bulbs. Both Access Points list 38 Clients which makes sense but 34 which are WiFi Bulbs appear as Wired on each Access Point. I consider this a bug. Concur?
 

ds5686920

Occasional Visitor
I should add the MoCA connection is directly between the APs. I don't know why this would cause a problem though because a switch is a switch.
 

L&LD

Part of the Furniture
You're not using a switch on what you've described above.
 

ds5686920

Occasional Visitor
Yes, not using a intermediary switch between the two APs. I have switch so will give it a go to see it makes a difference.
 

ds5686920

Occasional Visitor
I installed a switch and plugged both APs into it then plugged switch uplink port to Firewalla. Everything works but problem remains.
 

ds5686920

Occasional Visitor
Here is part of the client list category on the AP in question. The MACs that begin with '8C' are OHLUX Smart Bulbs which connect on 2.4 Ghz band.

1627311743513.png
 

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top